Copyright and Disclaimer Print  


Alberta Regulation 161/2017
School Act
SCHOOL TRANSPORTATION AMENDMENT REGULATION
Filed: August 16, 2017
For information only:   Made by the Minister of Education (M.O. 042/2017) on 
August 9, 2017 pursuant to sections 51, 39.1, 30 and 39 of the School Act.
1   The School Transportation Regulation (AR 102/2017) is 
amended by this Regulation.

2   Section 6(5) is amended by striking out "section 5" and 
substituting "section 4".


--------------------------------
Alberta Regulation 162/2017
Apprenticeship and Industry Training Act
APPEAL RULES AMENDMENT REGULATION
Filed: August 24, 2017
For information only:  Made by the Minister of Advanced Education (M.O. 305/2017) 
on August 21, 2017 pursuant to section 49 of the Apprenticeship and Industry  
Training Act. 
1   The Appeal Rules Regulation (AR 58/99) is amended by 
this Regulation.

2   Section 2(2), (3) and (4) are repealed and the following is 
substituted:
(2)  Notwithstanding section 43(c) of the Act and this Regulation, a 
refusal by the Executive Director to register a contract of 
apprenticeship on or after the date on which the designation of the 
trade to which the contract relates is rescinded, or the branch of the 
trade to which the contract relates is repealed, is not subject to 
appeal. 

3   Section 19 is repealed.



Alberta Regulation 163/2017
Apprenticeship and Industry Training Act
APPRENTICESHIP AND INDUSTRY TRAINING ADMINISTRATION 
AMENDMENT REGULATION
Filed: August 24, 2017
For information only:   Made by the Minister of Advanced Education (M.O. 306/2017) 
on August 21, 2017 pursuant to section 33(1) of the Apprenticeship and Industry 
Training Act.
1   The Apprenticeship and Industry Training 
Administration Regulation (AR 257/2000) is amended by 
this Regulation.

2   Section 33 is repealed.


--------------------------------
Alberta Regulation 164/2017
Apprenticeship and Industry Training Act
GASFITTER TRADE AMENDMENT REGULATION
Filed: August 24, 2017
For information only:   Made by the Alberta Apprenticeship and Industry Training 
Board on June 23, 2017 and approved by the Minister of Advanced Education on 
August 21, 2017 pursuant to section 33(2) of the Apprenticeship and Industry 
Training Act. 
1   The Gasfitter Trade Regulation (AR 279/2000) is amended 
by this Regulation.

2   Section 2(2) is amended
	(a)	in clause (a) by striking out "gasfitter (A)" and 
substituting "gasfitter - Class A";
	(b)	in clause (b) by striking out "gasfitter (B)" and 
substituting "gasfitter - Class B".

3   The heading after section 4 is amended by striking out 
"Gasfitter (A)" and substituting "Gasfitter - Class A".

4   Section 5 is amended by striking out "gasfitter (A)" and 
substituting "gasfitter - Class A".

5   Section 6 is amended by striking out "gasfitter (A)" and 
substituting "gasfitter - Class A".

6   Section 7 is amended
	(a)	in subsection (1) by striking out "gasfitter (A)" and 
substituting "gasfitter - Class A";
	(b)	in subsections (2) to (4) by striking out "1500" and 
substituting "1560".

7   Section 8 is amended
	(a)	in subsection (1)
	(i)	in clause (a) by striking out "gasfitter (B)" and 
substituting "gasfitter - Class B";
	(ii)	by striking out "gasfitter (A)" wherever it occurs 
and substituting "gasfitter - Class A";
	(b)	in subsection (2) by striking out "1500" and 
substituting "1560".

8   Section 9 is amended
	(a)	in subsections (1) to (2.1) by striking out "gasfitter 
(A)" wherever it occurs and substituting 
"gasfitter - Class A";
	(b)	in subsection (3)
	(i)	by striking out "gasfitter (A)" wherever it occurs 
and substituting "gasfitter - Class A";
	(ii)	in clause (a) by striking out "gasfitter (B)" and 
substituting "gasfitter - Class B" and by striking 
out "or" at the end of clause (a);
	(iii)	in clause (b) by striking out "gasfitter (B)" 
wherever it occurs and substituting 
"gasfitter - Class B" and by adding "or" at the end 
of clause (b);
	(iv)	by adding the following after clause (b):
	(c)	with respect to a person who is an apprentice in the 
gasfitter - Class B branch of the trade by virtue of 
being an apprentice in an apprenticeship program 
in the trade of sheet metal worker, employ that 
apprentice, subject to the Sheet Metal Worker 
Trade Regulation (AR 303/2000), to carry out any 
of the undertakings that constitute the 
gasfitter - Class B branch of the trade.

9   Section 10(1) and (2) are amended by striking out 
"gasfitter (A)" and substituting "gasfitter - Class A".

10   The heading after section 10 is amended by striking out 
"Gasfitter (B)" and substituting "Gasfitter - Class B".

11   Section 11 is amended by striking out "gasfitter (B)" and 
substituting "gasfitter - Class B".

12   Section 12 is amended by striking out "gasfitter (B)" and 
substituting "gasfitter - Class B".

13   Section 13 is amended
	(a)	in subsection (1) by striking out "gasfitter (B)" and 
substituting "gasfitter - Class B";
	(b)	in subsections (2) and (3) by striking out "1500" and 
substituting "1560".

14   Section 14 is amended
	(a)	in subsection (1)
	(i)	by striking out "gasfitter (A)" and substituting 
"gasfitter - Class A";
	(ii)	by striking out "gasfitter (B)" wherever it occurs 
and substituting "gasfitter - Class B";
	(b)	in subsection (2) by striking out "gasfitter (B)" 
wherever it occurs and substituting "gasfitter - Class 
B".
15   The following is added after section 14:
Apprenticeship re sheet metal worker
14.1(1)  Where a person
	(a)	is an apprentice in an apprenticeship program under the 
Sheet Metal Worker Trade Regulation (AR 303/2000), 
and
	(b)	does not hold a trade certificate in the gasfitter - Class A 
branch of the trade or the gasfitter - Class B branch of 
the trade,
that person is deemed to be an apprentice in the apprenticeship 
program for the gasfitter - Class B branch of the trade.
(2)  Notwithstanding section 13, a person who is an apprentice in 
an apprenticeship program for the trade of sheet metal worker is 
deemed to have acquired the necessary hours of on the job training 
and successfully completed the technical training that is required 
or approved by the Board for the gasfitter - Class B branch of the 
trade if that person acquires under the apprenticeship program for 
the trade of sheet metal worker the number of hours and 
successfully completes the technical training that is attributable to 
the training of a gasfitter - Class B under the apprenticeship 
program for the trade of sheet metal worker.

16   Section 16 is amended
	(a)	in subsections (1) and (2) by striking out "gasfitter 
(B)" wherever it occurs and substituting 
"gasfitter - Class B";
	(b)	in subsection (3)
	(i)	by striking out "gasfitter (B)" wherever it occurs 
and substituting "gasfitter - Class B";
	(ii)	in clause (a) by striking out "gasfitter (A)" and 
substituting "gasfitter - Class A" and by striking 
out "or" at the end of clause (a);
	(iii)	by adding ", or" at the end of clause (b) and by 
adding the following after clause (b):
	(c)	with respect to a person who is an apprentice in 
the gasfitter - Class B branch of the trade by virtue 
of being an apprentice in an apprenticeship 
program in the trade of sheet metal worker, may 
employ that apprentice, subject to the Sheet Metal 
Worker Trade Regulation (AR 303/2000), to carry 
out any of the undertakings that constitute the 
gasfitter - Class B branch of the trade.

17   Section 17 is amended
	(a)	in subsections (1), (2) and (3) by striking out 
"gasfitter (B)" and substituting "gasfitter - Class B";
	(b)	in subsection (1) by striking out "(2) or (3)" and 
substituting "(2), (3) or (3.1)";
	(c)	by adding the following after subsection (3):
(3.1)  Notwithstanding subsection (2), with respect to a person 
who is an apprentice in the gasfitter - Class B branch of the 
trade by virtue of being an apprentice in the apprenticeship 
program for the trade of sheet metal worker, a person 
employing that apprentice must pay wages to that apprentice in 
accordance with the Sheet Metal Worker Trade Regulation 
(AR 303/2000).

18   This Regulation comes into force on September 1, 2017.


--------------------------------
Alberta Regulation 165/2017
Apprenticeship and Industry Training Act
TRADE OCCUPATIONS REGULATIONS AMENDMENT REGULATION
Filed: August 24, 2017
For information only:   Made by the Alberta Apprenticeship and Industry Training 
Board on June 23, 2017 and approved by the Minister of Advanced Education on 
August 21, 2017 pursuant to section 33(2) of the Apprenticeship and Industry 
Training Act. 
1(1)  The Agricultural Equipment Technician Trade 
Regulation (AR 259/2000) is amended by this section.
(2)  Section 4 is amended by striking out "1500" wherever it 
occurs and substituting "1560".
(3)  The heading before section 7 is amended by striking out 
", Expiry".
(4)  Section 9 is repealed.

2(1)  The Auto Body Technician Trade Regulation 
(AR 161/2008) is amended by this section.
(2)  Section 7 is amended
	(a)	in subsections (2) and (3) by striking out "1600" and 
substituting "1620";
	(b)	in subsections (4) and (5) by striking out "1500" and 
substituting "1590".
(3)  Section 12 is amended
	(a)	in subsection (2) by striking out "1600" and 
substituting "1620";
	(b)	in subsections (3) and (4) by striking out "1500" and 
substituting "1590".
(4)  Sections 17(2) and (3) and 22(2) are amended by striking 
out "1600" and substituting "1620".

3(1)  The Electrician Trade Regulation (AR 274/2000) is 
amended by this section.
(2)  Section 4 is amended
	(a)	in subsections (2), (3) and (4) by striking out "1500" 
and substituting "1560";
	(b)	in subsection (5) by striking out "1350" and 
substituting "1440".
(3)  The heading before section 7 is amended by striking out 
", Expiry".
(4)  Section 9 is repealed.

4(1)  The Electric Motor Systems Technician Trade 
Regulation (AR 273/2000) is amended by this section.
(2)  Section 3(ll) is repealed and the following is substituted:
	(ll)	repairing and verifying certification of electrical equipment 
and components used in hazardous locations;
(3)  Section 4 is amended by striking out "1500" wherever it 
occurs and substituting "1560".
(4)  The heading before section 7 is amended by striking out 
", Expiry".
(5)  Section 9 is repealed.

5(1)  The Power System Electrician Trade Regulation 
(AR 297/2000) is amended by this section.
(2)  Section 4 is amended
	(a)	in subsections (2) and (3) by striking out "1500" and 
substituting "1590";
	(b)	in subsections (4) and (5) by striking out "1425" and 
substituting "1560".
(3)  The heading before section 7 is amended by striking out 
", Expiry".
(4)  Section 9 is repealed.

6(1)  The Sheet Metal Worker Trade Regulation 
(AR 303/2000) is amended by this section.
(2)  Section 1 is amended
	(a)	by adding the following after clause (c):
	(c.1)	"heating system" means a system for heating and 
circulating air inside a building using a gas fired 
appliance;
	(b)	by adding the following after clause (f):
	(g)	"ventilation system" means a system for exchanging air 
inside a building with fresh outside air and circulating 
air within a building;
	(h)	"venting system" means a system for exhausting 
combustion gases to the outside of a building and 
supplying air for combustion by heating systems.
(3)  Section 2(b)(ii) is amended by striking out "and 
ventilation" and substituting "systems, ventilation systems and 
venting".
(4)  Section 3 is amended
	(a)	by adding the following after clause (d):
	(d.1)	laying out, preparing, assembling and installing venting 
systems and pre-fabricated components of venting 
systems;
	(b)	by repealing clause (e) and substituting the 
following:
	(e)	installing, maintaining and repairing
	(i)	furnaces,
	(ii)	combination rooftop units,
	(iii)	make-up air units,
	(iv)	heat recovery and indoor air quality systems,
	(v)	heating systems,
	(vi)	ventilation systems,
	(vii)	air conditioning systems of up to 5 tons total 
capacity per system,
	(viii)	appliances, and
	(ix)	accessories to any item listed in subclauses (i) to 
(viii) and equipment similar to any item listed in 
subclauses (i) to (viii) related to or used for sheet 
metal work;
	(c)	by repealing clause (f) and substituting the 
following:
	(f)	carrying out the following servicing on electrical 
components of heating systems, ventilation systems and 
air conditioning systems, along with the associated 
connection and disconnection of de-energized electrical 
supply circuits of the systems:
	(i)	servicing or changing controls, contactors and 
motors;
	(ii)	repairing burnt or broken wires;
	(iii)	making minor upgrades of controls to existing 
heating systems, ventilation systems and air 
conditioning systems;
(5)  Section 4 is amended by striking out "1425" wherever it 
occurs and substituting "1500".
(6)  The heading before section 7 is amended by striking out 
", Expiry".
(7)  Section 9 is repealed.

7   This Regulation comes into force on September 1, 2017.

THE ALBERTA GAZETTE, PART II, SEPTEMBER 15, 2017