Copyright and Disclaimer Print  


Alberta Regulation 51/2008
Marketing of Agricultural Products Act
TURKEY MARKETING AMENDMENT REGULATION
Filed: April 23, 2008
For information only:   Made by Alberta Turkey Producers on February 11, 2008 
pursuant to sections 26 and 27 of the Marketing of Agricultural Products Act and 
approved by the Agricultural Products Marketing Council on February 15, 2008 
pursuant to sections 26 and 27 of the Marketing of Agricultural Products Act.
1   The Turkey Marketing Regulation (AR 113/98) is 
amended by this Regulation.

2   Section 12 is amended by adding the following after 
subsection (4):
(4.1)  The Board may direct producers who have been allocated 
quotas to market part or all of their quotas to specific processors.
(4.2)  If the Board directs producers to market part or all of their 
quotas to specific processors under subsection (4.1), the Board 
must establish rules, procedures and policies respecting the Board's 
directions to producers under subsection (4.1) and must review the 
rules, procedures and policies established under this subsection 
annually.


--------------------------------
Alberta Regulation 52/2008
Municipal Government Act
SOUTH RED DEER REGIONAL WASTEWATER 
COMMISSION REGULATION
Filed: April 23, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 142/2008) 
on April 23, 2008 pursuant to section 602.02 of the Municipal Government Act. 
Table of Contents
	1	Establishment
	2	Members
	3	Services
	4	Operating deficits
	5	Sale of property
	6	Profit and surpluses
	7	Approval
Establishment
1   A regional services commission known as the South Red Deer 
Regional Wastewater Commission is established.
Members
2   The following municipalities are members of the Commission:
	(a)	Town of Bowden;
	(b)	Town of Innisfail;
	(c)	Town of Olds;
	(d)	Town of Penhold;
	(e)	Mountain View County;
	(f)	Red Deer County.
Services
3   The Commission is authorized to provide and operate a wastewater 
supply system.
Operating deficits
4   The Commission may not assume operating deficits that are shown 
on the books of any of the member municipalities.
Sale of property
5(1)  The Commission may not, without the approval of the Minister, 
sell any of its land, buildings, equipment or inventory whose purchase 
has been funded wholly or partly by grants from the Government of 
Alberta.
(2)  The Minister may not approve a sale under subsection (1) unless 
the Minister is satisfied
	(a)	as to the repayment of the grants from the Government of 
Alberta and outstanding debt associated with that portion of 
the land, buildings, equipment or inventory to be sold,
	(b)	that the sale would not have a significant adverse effect on 
the services the Commission provides, and
	(c)	that the sale will be properly reflected in the rates 
subsequently charged to the customers of the Commission.
Profit and surpluses
6   Unless otherwise approved by the Minister, the Commission may 
not
	(a)	operate for the purposes of making a profit, or
	(b)	distribute any of its surpluses to its member municipalities.
Approval
7   The Minister may make an approval under section 5 or 6 subject to 
any terms or conditions the Minister considers appropriate.


--------------------------------
Alberta Regulation 53/2008
Municipal Government Act
SYLVAN LAKE REGIONAL WASTEWATER COMMISSION REGULATION
Filed: April 23, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 143/2008) 
on April 23, 2008 pursuant to section 602.02 of the Municipal Government Act. 
Table of Contents
	1	Establishment
	2	Members
	3	Services
	4	Operating deficits
	5	Sale of property
	6	Profit and surpluses
	7	Approval
Establishment
1   A regional services commission known as the Sylvan Lake 
Regional Wastewater Commission is established.
Members
2   The following municipalities are members of the Commission:
	(a)	Summer Village of Birchcliff;
	(b)	Summer Village of Half Moon Bay;
	(c)	Summer Village of Norglenwold;
	(d)	Summer Village of Sunbreaker Cove;
	(e)	The Summer Village of Jarvis Bay;
	(f)	Town of Sylvan Lake;
	(g)	Lacombe County;
	(h)	Red Deer County.
Services
3   The Commission is authorized to provide and operate a wastewater 
supply system.
Operating deficits
4   The Commission may not assume operating deficits that are shown 
on the books of any of the member municipalities.
Sale of property
5(1)  The Commission may not, without the approval of the Minister, 
sell any of its land, buildings, equipment or inventory whose purchase 
has been funded wholly or partly by grants from the Government of 
Alberta.
(2)  The Minister may not approve a sale under subsection (1) unless 
the Minister is satisfied
	(a)	as to the repayment of the grants from the Government of 
Alberta and outstanding debt associated with that portion of 
the land, buildings, equipment or inventory to be sold,
	(b)	that the sale would not have a significant adverse effect on 
the services the Commission provides, and
	(c)	that the sale will be properly reflected in the rates 
subsequently charged to the customers of the Commission.
Profit and surpluses
6   Unless otherwise approved by the Minister, the Commission may 
not
	(a)	operate for the purposes of making a profit, or
	(b)	distribute any of its surpluses to its member municipalities.
Approval
7   The Minister may make an approval under section 5 or 6 subject to 
any terms or conditions the Minister considers appropriate.


--------------------------------
Alberta Regulation 54/2008
Municipal Government Act
SYLVAN LAKE REGIONAL WATER COMMISSION REGULATION
Filed: April 23, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 144/2008) 
on April 23, 2008 pursuant to section 602.02 of the Municipal Government Act. 
Table of Contents
	1	Establishment
	2	Members
	3	Services
	4	Operating deficits
	5	Sale of property
	6	Profit and surpluses
	7	Approval
Establishment
1   A regional services commission known as the Sylvan Lake 
Regional Water Commission is established.
Members
2   The following municipalities are members of the Commission:
	(a)	Summer Village of Birchcliff;
	(b)	Summer Village of Half Moon Bay;
	(c)	Summer Village of Norglenwold;
	(d)	Summer Village of Sunbreaker Cove;
	(e)	The Summer Village of Jarvis Bay;
	(f)	Town of Sylvan Lake;
	(g)	Lacombe County;
	(h)	Red Deer County.
Services
3   The Commission is authorized to provide and operate a water 
supply system.
Operating deficits
4   The Commission may not assume operating deficits that are shown 
on the books of any of the member municipalities.
Sale of property
5(1)  The Commission may not, without the approval of the Minister, 
sell any of its land, buildings, equipment or inventory whose purchase 
has been funded wholly or partly by grants from the Government of 
Alberta.
(2)  The Minister may not approve a sale under subsection (1) unless 
the Minister is satisfied
	(a)	as to the repayment of the grants from the Government of 
Alberta and outstanding debt associated with that portion of 
the land, buildings, equipment or inventory to be sold,
	(b)	that the sale would not have a significant adverse effect on 
the services the Commission provides, and
	(c)	that the sale will be properly reflected in the rates 
subsequently charged to the customers of the Commission.
Profit and surpluses
6   Unless otherwise approved by the Minister, the Commission may 
not
	(a)	operate for the purposes of making a profit, or
	(b)	distribute any of its surpluses to its member municipalities.
Approval
7   The Minister may make an approval under section 5 or 6 subject to 
any terms or conditions the Minister considers appropriate.



Alberta Regulation 55/2008
Post-secondary Learning Act
LONG-RANGE PLANS AND COMMERCIAL PURPOSE DEFINITION 
AMENDMENT REGULATION
Filed: April 23, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 155/2008) 
on April 23, 2008 pursuant to section 124 of the Post-secondary Learning Act. 
1   The Long-range Plans and Commercial Purpose 
Definition Regulation (AR 54/2004) is amended by this 
Regulation.



2   The title of the Regulation is repealed and the following 
is substituted:
LAND USE REGULATION

3   The following is added before section 1:
Part 1 
Long-range Plans and Commercial 
Purposes Definition

4   The heading before section 3 is repealed.

5   The following is added after section 10:
Part 2 
Support Services Definition
Support services defined
10.1   For the purposes of section 67(1.1)(b) of the Act, "support 
services" means any services offered or provided to the students, 
faculty or staff of a public post-secondary institution including, 
without limitation,
	(a)	academic and staff association services,
	(b)	student organization services,
	(c)	convenience stores and food and beverage services,
	(d)	book stores and study-support and office-support 
services,
	(e)	audio-visual, entertainment, communications and 
information technology services,
	(f)	financial, daycare, health and other personal and daily 
living services, and
	(g)	parking and residential services.

6   The heading before section 11 is repealed and the 
following is substituted:
Part 3 
Transitional Matters, Expiry 
and Coming into Force


--------------------------------
Alberta Regulation 56/2008
Marketing of Agricultural Products Act
ALBERTA MILK PLAN MINIMUM PRICE FOR  
SUB-CLASS 1A MILK ORDER
Filed: April 25, 2008
For information only:   Made by the Alberta Utilities Commission on April 18, 2008 
pursuant to section 5(4) of the Alberta Milk Plan Regulation (AR 150/2002).
Minimum price for sub-class 1a milk
1   The minimum price for sub-class 1a milk to be paid by processors 
for a hectolitre of sub-class 1a milk is $85.33.
Repeal
2   The Alberta Milk Plan Minimum Price for Sub-class 1a Milk Order 
(AR 44/2008) is repealed.
Coming into force
3   This Order comes into force on May 15, 2008.



Alberta Regulation 57/2008
Apprenticeship and Industry Training Act
PARTS TECHNICIAN TRADE REGULATION
Filed: April 29, 2008
For information only:   Made by the Alberta Apprenticeship and Industry Training 
Board on March 14, 2008 pursuant to section 33(2) of the Apprenticeship and 
Industry Training Act and approved by the Minister of Advanced Education and 
Technology on April 21, 2008 pursuant to section 33(2) of the Apprenticeship and 
Industry Training Act.
Table of Contents


	1	Definitions
Part 1 
General Matters Respecting the Trade
	2	Constitution of the trade
	3	Tasks, activities and functions
	4	Supervision, etc. of apprentices
Part 2 
Parts Technician Branch of the Trade
	5	Definition
Trade Matters Respecting the Branch
	6	Undertakings constituting the branch
	7	Tasks, activities and functions
Apprenticeship
	8	Term of the apprenticeship program re parts technician
	9	Employment of apprentices re parts technician
	10	Wages re parts technician
Part 3 
Materials Technician Branch of the Trade
	11	Definition
Trade Matters Respecting the Branch
	12	Undertakings constituting the branch
	13	Tasks, activities and functions
Apprenticeship
	14	Term of the apprenticeship program re materials technician
	15	Employment of apprentices re materials technician
	16	Wages re materials technician
Part 4 
Transitional Provisions, Repeal, Expiry and Coming into 
Force
	17	Apprenticeship continues
	18	Repeal
	19	Expiry
	20	Coming into force
Definitions
1   In this Regulation,
	(a)	"apprentice" means a person who is an apprentice in the 
trade;
	(b)	"certified journeyperson" means a certified journeyperson as 
defined in the Apprenticeship Program Regulation 
(AR 258/2000);
	(c)	"technical training" means technical training as defined in the 
Apprenticeship Program Regulation (AR 258/2000);
	(d)	"trade" means the occupation of parts technician that is 
designated as an optional certification trade pursuant to the 
Apprenticeship and Industry Training Act;
	(e)	"uncertified journeyperson" means an uncertified 
journeyperson as defined in the Apprenticeship Program 
Regulation (AR 258/2000).
Part 1 
General Matters Respecting 
the Trade
Constitution of the trade
2(1)  The undertakings set out in sections 6 and 12 constitute the trade.
(2)  The trade is made up of the following:
	(a)	the parts technician branch of the trade; 
	(b)	the materials technician branch of the trade.
Tasks, activities and functions
3   When practising or otherwise carrying out work in the trade, the 
tasks, activities and functions set out in sections 7 and 13 come within 
the trade.
Supervision, etc. of apprentices
4(1)  Where, in respect of a branch of the trade, a person is a certified 
journeyperson or an uncertified journeyperson and is to provide 
supervision to an apprentice, that journeyperson is eligible to supervise 
that apprentice only
	(a)	in respect of the undertakings that constitute that branch, and
	(b)	in respect of tasks, activities and functions that come within 
that branch,
for which that person is a certified journeyperson or an uncertified 
journeyperson.
(2)  Where a person is an apprentice in an apprenticeship program in a 
branch of the trade and is employed in respect of another branch of the 
trade, that apprentice is eligible to carry out work only
	(a)	in respect of the undertakings that constitute that branch, and
	(b)	in respect of tasks, activities and functions that come within 
that branch,
for which that person is an apprentice.
Part 2 
Parts Technician Branch of the Trade
Definition
5   In this Part, "parts" means any part, assembly or accessory 
pertaining to the following:
	(a)	automobiles and trucks;
	(b)	aviation;
	(c)	electronics;
	(d)	heavy duty vehicles and equipment;
	(e)	agricultural equipment;
	(f)	industrial equipment;
	(g)	military equipment;
	(h)	motorcycles;
	(i)	outdoor power equipment;
	(j)	recreational vehicles and equipment;
	(k)	marine equipment;
	(l)	turf equipment;
	(m)	appliances.
Trade Matters Respecting the Branch
Undertakings constituting the branch
6   The undertakings that constitute the parts technician branch of the 
trade are the stock handling, inventory control, storing, securing, 
identifying, cataloguing, ordering, shipping, transporting, receiving, 
inspecting, pricing, purchasing, issuing, marketing and selling of parts.
Tasks, activities and functions
7   When practising or otherwise carrying out work in the parts 
technician branch of the trade, the following tasks, activities and 
functions come within that branch of the trade:
	(a)	assessing customer requirements and providing the parts 
necessary for service, repair or replacement;
	(b)	using electronic and non-electronic location systems, 
identification systems, communication systems and business 
procedures for the purpose of managing inventory and 
addressing customer needs;
	(c)	selling and distributing parts;
	(d)	selecting, operating and basic maintenance of hand tools and 
material handling equipment;
	(e)	wrapping, packaging, labelling and strapping parts;
	(f)	planning, maintaining and updating display areas;
	(g)	operating and managing tool crib.
Apprenticeship
Term of the apprenticeship program re parts technician
8(1)  Subject to credit for previous training or experience being 
granted pursuant to an order of the Board, the term of an 
apprenticeship program for the parts technician branch of the trade is 3 
periods of not less than 12 months each.
(2)  In the first period of the apprenticeship program an apprentice 
must acquire not less than 1500 hours of on the job training and 
successfully complete the technical training that is required or 
approved by the Board.
(3)  In the 2nd period of the apprenticeship program an apprentice 
must acquire not less than 1500 hours of on the job training and 
successfully complete the technical training that is required or 
approved by the Board.
(4)  In the 3rd period of the apprenticeship program an apprentice must 
acquire not less than 1500 hours of on the job training and successfully 
complete the technical training that is required or approved by the 
Board.
Employment of apprentices re parts technician
9(1)  Where, with respect to the employment of apprentices in the 
parts technician branch of the trade, a person employs an apprentice, 
that employment must be carried out in accordance with this section.
(2)  Subject to subsection (3), a person who is a certified journeyperson 
or an uncertified journeyperson in the parts technician branch of the 
trade or employs a certified journeyperson or an uncertified 
journeyperson in that branch may employ 2 apprentices in that branch 
and 2 additional apprentices in that branch for each additional certified 
journeyperson or uncertified journeyperson in that branch that is 
employed by that person.
(3)  Subsection (2) does not apply to an apprentice who is engaged in 
an apprenticeship program
	(a)	in the parts technician branch of the trade and has completed 
all the requirements required or approved by the Board for 
advancement into the 3rd period of that apprenticeship 
program, or
	(b)	in the materials technician branch of the trade and has 
completed all the requirements required or approved by the 
Board for advancement into the 3rd period of that 
apprenticeship program.
(4)  For the purposes of subsection (2), a person who is a certified 
journeyperson or an uncertified journeyperson in the parts technician 
branch of the trade or employs a certified journeyperson or an 
uncertified journeyperson in the parts technician branch of the trade, 
instead of employing an apprentice in an apprenticeship program in the 
parts technician branch of the trade, may employ an apprentice in an 
apprenticeship program in the materials technician branch of the trade 
to carry out any of the undertakings that constitute the materials 
technician branch of the trade.
Wages re parts technician
10(1)  With respect to the payment of wages to an apprentice in an 
apprenticeship program in the parts technician branch of the trade, a 
person shall not, subject to the Apprenticeship Program Regulation 
(AR 258/2000), pay wages to an apprentice that are less than those 
provided for under subsection (2).
(2)  Subject to the Employment Standards Code, a person employing 
an apprentice referred to in subsection (1) must pay wages to the 
apprentice that are at least equal to the following percentages of the 
wages paid to employees who are certified journeypersons or 
uncertified journeypersons in the parts technician branch of the trade:
	(a)	65% in the first period of the apprenticeship program;
	(b)	75% in the 2nd period of the apprenticeship program;
	(c)	85% in the 3rd period of the apprenticeship program.
Part 3 
Materials Technician Branch  
of the Trade
Definition
11   In this Part, "commodities" includes any product, substance or 
organism pertaining to the following:
	(a)	consumer services or products;
	(b)	agricultural services or products;
	(c)	transportation services or products;
	(d)	natural resource products;
	(e)	manufacturing products;
	(f)	services or products for all levels of government.
Trade Matters Respecting the Branch
Undertakings constituting the branch
12   The undertakings that constitute the materials technician branch of 
the trade are the stock handling, inventory control, storing, securing, 
identifying, cataloguing, ordering, shipping, transporting, receiving, 
inspecting, pricing, purchasing, issuing, marketing and selling of 
commodities.
Tasks, activities and functions
13   When practising or otherwise carrying out work in the materials 
technician branch of the trade, the following tasks, activities and 
functions come within that branch of the trade:
	(a)	assessing customer requirements and providing the 
commodities necessary for service, repair or replacement;
	(b)	using electronic and non-electronic location systems, 
identification systems, communication systems and business 
procedures for the purpose of managing inventory and 
addressing customer needs;
	(c)	selling and distributing commodities;
	(d)	selecting, operating and basic maintenance of hand tools and 
material handling equipment;
	(e)	wrapping, packaging, labelling and strapping commodities;
	(f)	planning, maintaining and updating display areas;
	(g)	operating and managing tool crib.
Apprenticeship
Term of the apprenticeship program re materials technician 
14(1)  Subject to credit for previous training or experience being 
granted pursuant to an order of the Board, the term of an 
apprenticeship program for the materials technician branch of the trade 
is 3 periods of not less than 12 months each.
(2)  In the first period of the apprenticeship program an apprentice 
must acquire not less than 1500 hours of on the job training and 
successfully complete the technical training that is required or 
approved by the Board.
(3)  In the 2nd period of the apprenticeship program an apprentice 
must acquire not less than 1500 hours of on the job training and 
successfully complete the technical training that is required or 
approved by the Board.
(4)  In the 3rd period of the apprenticeship program an apprentice must 
acquire not less than 1500 hours of on the job training and successfully 
complete the technical training that is required or approved by the 
Board. 
Employment of apprentices re materials technician
15(1)  Where, with respect to the employment of apprentices in the 
materials technician branch of the trade, a person employs an 
apprentice, that employment must be carried out in accordance with 
this section.
(2)  Subject to subsection (3), a person who is a certified journeyperson 
or an uncertified journeyperson in the materials technician branch of 
the trade or employs a certified journeyperson or an uncertified 
journeyperson in that branch may employ 2 apprentices in that branch 
and 2 additional apprentices in that branch for each additional certified 
journeyperson or uncertified journeyperson in that branch that is 
employed by that person.
(3)  Subsection (2) does not apply to an apprentice who is engaged in 
an apprenticeship program
	(a)	in the materials technician branch of the trade and has 
completed all the requirements required or approved by the 
Board for advancement into the 3rd period of that 
apprenticeship program, or
	(b)	in the parts technician branch of the trade and has completed 
all the requirements required or approved by the Board for 
advancement into the 3rd period of that apprenticeship 
program.
(4)  For the purposes of subsection (2), a person who is a certified 
journeyperson or an uncertified journeyperson in the materials 
technician branch of the trade or employs a certified journeyperson or 
an uncertified journeyperson in the materials technician branch of the 
trade, instead of employing an apprentice in an apprenticeship program 
in the materials technician branch of the trade, may employ an 
apprentice in an apprenticeship program in the parts technician branch 
of the trade to carry out any of the undertakings that constitute the 
parts technician branch of the trade.
Wages re materials technician
16(1)  With respect to the payment of wages to an apprentice in an 
apprenticeship program in the materials technician branch of the trade, 
a person shall not, subject to the Apprenticeship Program Regulation 
(AR 258/2000), pay wages to an apprentice that are less than those 
provided for under subsection (2).
(2)  Subject to the Employment Standards Code, a person employing 
an apprentice referred to in subsection (1) must pay wages to the 
apprentice that are at least equal to the following percentages of the 
wages paid to employees who are certified journeypersons or 
uncertified journeypersons in the materials technician branch of the 
trade:
	(a)	65% in the first period of the apprenticeship program;
	(b)	75% in the 2nd period of the apprenticeship program;
	(c)	85% in the 3rd period of the apprenticeship program.
Part 4 
Transitional Provisions, Repeal,  
Expiry and Coming into Force
Apprenticeship continues
17   A person who immediately prior to May 1, 2008 was an 
apprentice in an apprenticeship program under the Parts Technician 
Trade Regulation (AR 293/2000) continues as an apprentice in that 
apprenticeship program under this Regulation.
Repeal
18   The Parts Technician Trade Regulation (AR 293/2000) is 
repealed.
Expiry
19   For the purpose of ensuring that this Regulation is reviewed for 
ongoing relevancy and necessity, with the option that it may be 
repassed in its present or an amended form following a review, this 
Regulation expires on August 31, 2013.
Coming into force
20   This Regulation comes into force on May 1, 2008.



Alberta Regulation 58/2008
Apprenticeship and Industry Training Act
HAIRSTYLIST TRADE AMENDMENT REGULATION
Filed: April 29, 2008
For information only:   Made by the Alberta Apprenticeship and Industry Training 
Board on March 14, 2008 pursuant to section 33(2) of the Apprenticeship and 
Industry Training Act and approved by the Minister of Advanced Education and 
Technology on April 21, 2008 pursuant to section 33(2) of the Apprenticeship and 
Industry Training Act.
1   The Hairstylist Trade Regulation (AR 281/2000) is 
amended by this Regulation.

2   Section 3(d) is amended by striking out "cleaning" and 
substituting "cleansing".


--------------------------------
Alberta Regulation 59/2008
Alberta Treasury Branches Act
ALBERTA TREASURY BRANCHES (ASSET-BACKED COMMERCIAL 
PAPER, 2008) AMENDMENT REGULATION
Filed: April 30, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 170/2008) 
on April 30, 2008 pursuant to section 34 of the Alberta Treasury Branches Act. 
1   The Alberta Treasury Branches Regulation (AR 187/97) is 
amended by this Regulation.

2   Section 8 is amended
	(a)	in subsection (2) by striking out "and section 30(2), 
"loan" includes a guarantee" and substituting ", section 
10(5) and section 30(2), references to the making of a loan 
are to be taken to include references to the guaranteeing of 
persons' obligations and for the purposes of section 18(2)(c) 
of the Act "investment" includes anything into which money 
may be placed as a result of subsection (5)(m)";
	(b)	in subsection (5) by adding the following after 
clause (l):
	(m)	investments in notes issued by master asset 
partnerships, as contemplated in the Framework 
Agreement executed by ATB and other members of the 
Pan-Canadian Third Party Asset-Backed Commercial 
Paper Investors Committee that became effective on 
December 23, 2007, including the results of 
participation in any related margin funding facility or 
other actions or agreements to be entered into in 
furtherance of the proposed restructuring contemplated 
in that Agreement, as approved by the board.

3   Section 10 is amended
	(a)	in subsection (2.3) by striking out "ATB" and 
substituting "Notwithstanding subsection (1), ATB";
	(b)	by adding the following after subsection (4):
(5)  Notwithstanding subsection (1), ATB may enter into credit 
derivative contracts for the purpose of hedging investments 
referred to in section 8(5)(m) against any risks to which they 
may be subject.


--------------------------------
Alberta Regulation 60/2008
Stray Animals Act
STRAY ANIMALS AMENDMENT REGULATION
Filed: April 30, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 172/2008) 
on April 30, 2008 pursuant to section 35 of the Stray Animals Act. 
1   The Stray Animals Regulation (AR 301/96) is amended by 
this Regulation.

2   Section 2 is amended
	(a)	by striking out "section 1(d)" and substituting "section 
1(c)";
	(b)	by repealing clause (e).



Alberta Regulation 61/2008
Provincial Court Act
PROVINCIAL COURT JUDGES AND MASTERS IN CHAMBERS 
COMPENSATION AMENDMENT REGULATION
Filed: April 30, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 184/2008) 
on April 30, 2008 pursuant to section 9.52 of the Provincial Court Act. 
1   The Provincial Court Judges and Masters in Chambers 
Compensation Regulation (AR 176/98) is amended by this 
Regulation.

2   Section 1 is amended by adding the following after 
subsection (3.4):
(3.5)  For the period February 4, 2008 to March 31, 2009, the 
salary to be paid to the Deputy Chief Judge is $231 250 per year.

3   Section 1.1 is amended by adding ", Deputy Chief Judge" 
after "as Chief Judge" wherever it occurs.

4   Section 6 is amended by adding "and Deputy Chief Judge" 
after "Chief Judge".

5   Section 2 is deemed to have come into force on 
February 4, 2008.


--------------------------------
Alberta Regulation 62/2008
Environmental Protection and Enhancement Act
ENVIRONMENTAL ASSESSMENT (MANDATORY AND EXEMPTED 
ACTIVITIES) AMENDMENT REGULATION
Filed: April 30, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 185/2008) 
on April 30, 2008 pursuant to section 59 of the Environmental Protection and 
Enhancement Act. 
1   The Environmental Assessment (Mandatory and 
Exempted Activities) Regulation (AR 111/93) is amended by 
this Regulation.

2   Schedule 1 is amended by repealing item (m).

3   Schedule 2 is amended in item (a)(vi) by striking out 
"with a voltage of less than 130 kilovolts".


--------------------------------
Alberta Regulation 63/2008
Environmental Protection and Enhancement Act
CONSERVATION AND RECLAMATION AMENDMENT REGULATION
Filed: April 30, 2008
For information only:   Made by the Lieutenant Governor in Council (O.C. 186/2008) 
on April 30, 2008 pursuant to section 146 of the Environmental Protection and 
Enhancement Act. 
1   The Conservation and Reclamation Regulation 
(AR 115/93) is amended by this Regulation.

2   Section 17.1 is amended by adding the following after 
clause (c):
	(d)	an operator that has, or applies for, an approval for the 
construction, operation or reclamation of a transmission line.

3   The following is added after section 25:
Expiry
25.1   For the purpose of ensuring that this Regulation is reviewed 
for ongoing relevancy and necessity, with the option that it may be 
repassed in its present or an amended form following a review, this 
Regulation expires on April 30, 2013.