![]() |
![]() |
Alberta Regulation 128/2000 Apprenticeship and Industry Training Act ELECTRICAL REWIND MECHANIC TRADE AMENDMENT REGULATION Filed: June 26, 2000 Made by the Alberta Apprenticeship and Industry Training Board on May 15, 2000 pursuant to section 33(2) of the Apprenticeship and Industry Training Act. 1 The Electrical Rewind Mechanic Trade Regulation (AR 126/94) is amended by this Regulation. 2 The title to the Regulation is amended by striking out "REWIND MECHANIC" and substituting "MOTOR SYSTEMS TECHNICIAN". 3 Section 1(c) is amended by adding "and that is known under this Regulation as the trade of Electrical Motor Systems Technician" after "Apprenticeship and Industry Training Act". ------------------------------ Alberta Regulation 129/2000 Apprenticeship and Industry Training Act GLAZIER TRADE REGULATION Filed: June 26, 2000 Made by the Alberta Apprenticeship and Industry Training Board on May 26, 2000 pursuant to section 33(2) of the Apprenticeship and Industry Training Act. Table of Contents Definitions 1 Constitution of the trade 2 Tasks, activities and functions 3 Educational requirements of an apprentice 4 Term of the apprenticeship program for Glazier 5 Term of apprenticeship program for Auto Glass Technician 6 Employment of apprentices 7 Wages 8 Transitional 9 Repeal 10 Coming into force 11 Schedule 1 - Glazier Schedule 2 - Auto Glass Technician Branch of the Glazier Trade Definitions 1 In this Regulation, (a) "apprentice" means a person who is an apprentice in the trade; (b) "certified journeyman" means a certified journeyman as defined in the Apprenticeship Program and Certification Regulation (Alta. Reg. 1/92); (c) "trade" means the occupation of Glassworker that is designated as an optional certification trade pursuant to section 57 of the Apprenticeship and Industry Training Act and that is known under this Regulation as the trade of Glazier; (d) "uncertified journeyman" means an uncertified journeyman as defined in the Apprenticeship Program and Certification Regulation (Alta. Reg. 1/92). Constitution of the trade 2(1) The undertakings set out in section 2 of Schedule 1 constitute the complete trade of Glazier. (2) The undertakings set out in section 2 of Schedule 2 constitute the Auto Glass Technician branch of the trade. Tasks, activities and functions 3(1) When practising or otherwise carrying out work in the complete trade of Glazier, the tasks, activities and functions set out in section 3 of Schedule 1 come within the trade. (2) When practising or otherwise carrying out work in the Auto Glass Technician branch of the trade, the tasks, activities and functions set out in section 3 of Schedule 2 come within the trade. Educational requirements of an apprentice 4 The educational requirement for an apprentice is (a) the completion of an Alberta grade 9 education or equivalent, or (b) the successful completion of one or more examinations that are set or recognized by the Board. Term of the apprenticeship program for Glazier 5(1) Subject to section 11 of the Apprenticeship Program and Certification Regulation (AR 1/92), the term of an apprenticeship program for the complete trade of Glazier shall consist of 4 periods of not less than 12 months each. (2) In the first period of the apprenticeship program an apprentice must acquire not less than 1620 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (3) In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1620 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (4) In the 3rd period of the apprenticeship program an apprentice must acquire not less than 1620 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (5) In the 4th period of the apprenticeship program an apprentice must acquire not less than 1620 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. Term of the apprenticeship program for Auto Glass Technician 6(1) Subject to section 11 of the Apprenticeship Program and Certification Regulation (AR 1/92), the term of an apprenticeship program for the Auto Glass Technician branch of the trade shall consist of 2 periods of not less than 12 months each. (2) In the first period of the apprenticeship program an apprentice must acquire not less than 1620 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (3) In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1620 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. Employment of apprentices 7(1) A person shall not employ an apprentice except in accordance with this section. (2) In the case of an apprentice in the apprenticeship program for the complete trade of Glazier, a person who is a certified journeyman or an uncertified journeyman in the complete trade of Glazier or employs a person who is a certified journeyman or an uncertified journeyman in the complete trade of Glazier may employ one apprentice and one additional apprentice for each additional certified journeyman or uncertified journeyman of that class that is employed by that person. (3) In the case of an apprentice in the apprenticeship program for the Auto Glass Technician branch of the trade, a person who is a certified journeyman or an uncertified journeyman in the complete trade of Glazier or the Auto Glass Technician branch of the trade or employs a person who is a certified journeyman or an uncertified journeyman in the complete trade of Glazier or the Auto Glass Technician branch of the trade may employ one apprentice and one additional apprentice for each additional certified journeyman or uncertified journeyman of either of those classes that is employed by that person. Wages 8(1) A person shall not pay wages to an apprentice that are less than those provided for under subsection (2). (2) Subject to the Employment Standards Code, a person employing an apprentice shall, (a) in the case of an apprentice in the apprenticeship program for the complete trade of Glazier, pay wages to an apprentice that are at least equal to the following percentages of the wages paid to employees who are certified journeymen or uncertified journeymen in the complete trade of Glazier: (i) 55% in the first period of the apprenticeship program; (ii) 60% in the 2nd period of the apprenticeship program; (iii) 65% in the 3rd period of the apprenticeship program; (iv) 70% in the 4th period of the apprenticeship program; (b) in the case of an apprentice in the apprenticeship program in the Auto Glass Technician branch of the trade, pay wages to an apprentice that are at least equal to the following percentages of the wages paid to employees who are certified journeymen or uncertified journeymen in the Auto Glass Technician branch of the trade: (i) 55% in the first period of the apprenticeship program; (ii) 65% in the 2nd period of the apprenticeship program. Transitional 9 A person who at the time that this Regulation comes into force is an apprentice in an apprenticeship program under the Glazier Trade Regulation (AR 129/94) may complete that apprenticeship program under the Glazier Trade Regulation (AR 129/94) in accordance with and subject to the same rights and obligations under that Regulation as if that Regulation were still in force. Repeal 10 The Glazier Trade Regulation (AR 129/94) is repealed. Coming into force 11 This Regulation comes into force on July 1, 2000. SCHEDULE 1 GLAZIER 1 In this Schedule, "glass" means any type of commercial, residential, decorative or auto glass or related material and without limiting the generality of the foregoing includes the following: (a) curtain walls; (b) skylights and sloped glazing; (c) frames and doors; (d) automatic doors; (e) manual doors; (f) mirrors; (g) glass as defined under section 1 of Schedule 2. 2(1) The following undertakings constitute the complete trade of Glazier: (a) glazing, setting, attaching, installing and removing all types of glass for buildings, fixtures and other uses; (b) installing, fitting, fabricating and attaching architectural metals or related products for all types of buildings; (c) cutting, preparing, fabricating or any other handling of glass for buildings, fixtures and other uses. (2) Without restricting the generality of subsection (1), the undertakings that constitute the complete trade of Glazier include the undertakings that constitute the Auto Glass Technician branch of the trade. 3(1) When practising or otherwise carrying out work in the complete trade of Glazier, the following tasks, activities and functions come within the complete trade of Glazier: (a) storing and handling glass; (b) cutting, selecting and fitting glass; (c) preparation and fabrication of glass to specifications; (d) installation of glass into window frames; (e) installation of auto glass; (f) installation, etching and cutting of mirrors; (g) installation and renovation of residential windows, tub enclosures, shower doors and other related products; (h) installation of structural glass; (i) installation and maintenance of automatic and revolving doors; (j) installation of skylights, sloped glazing, barrel vaults, solariums and other support structures; (k) fabrication and installation of curtain walls; (l) installation and maintenance of aluminum and glass doors; (m) preparation, fabrication and installation of aluminum storefronts and windows; (n) preparation and installation of sealants; (o) interpretation of blueprints and shop drawings; (p) diagnosing problems and making any repairs relating to glazing; (q) operation of any hand and power operated equipment that is used in the trade; (r) carrying out damaged light removal procedures and the installation and sealing of new parts; (s) using the National Auto Glass Specifications Parts Book, including identification and selection of heat treated or laminated bent glass parts and following cutting and edgework procedures for laminated flat glass in accordance with N.A.G. specifications. (2) Without restricting the generality of subsection (1), the tasks, activities and functions set out in section 3 of Schedule 2 come within the complete trade of Glazier. SCHEDULE 2 AUTO GLASS TECHNICIAN BRANCH OF THE GLAZIER TRADE 1 In this Schedule, "glass" means any type of vehicular and flat glass or related materials and without limiting the generality of the foregoing includes the following: (a) glass for vehicles; (b) glass for off-road heavy equipment; (c) flat glass; (d) mirrors; (e) screens. 2 The following undertakings constitute the Auto Glass Technician branch of the trade: (a) glazing, setting, attaching, installing and removing all types of glass for vehicles and off-road heavy equipment; (b) cutting, preparing, fabricating or any other handling of flat glass for buildings, fixtures and other uses. 3 When practising or otherwise carrying out work in the Auto Glass Technician branch of the trade, the following tasks, activities and functions come within that branch of the trade: (a) storing and handling glass; (b) cutting, selecting and fitting glass; (c) preparation and fabrication of glass to specification; (d) removal and installation of vehicle windshields using gluing techniques; (e) removal and installation of vehicle windshields using self-locking or lace type rubber techniques; (f) removal and installation of vehicle backlites using gluing techniques; (g) removal and installation of vehicle backlites using self-locking or lace type rubber techniques; (h) removal and installation of laminated flat safety glass in respect of vehicles; (i) removal and installation of vehicles sidelites; (j) installation of sun-roofs in respect of vehicles; (k) installation of fixed or operating windows in vehicles; (l) tinting of glass for vehicles; (m) repairing windshields and rock chips in windshields; (n) hook-up of "in glass" radio antennas and de-foggers; (o) installation of electrical and electronics components related to vehicles; (p) pattern cutting laminated safety glass for various applications; (q) installation of glass into window frames; (r) installation, etching and cutting of mirrors; (s) installation and renovating of residential windows, tub enclosures, shower doors and other related products; (t) preparation, fabrication and installation of aluminium windows; (u) preparation and installation of sealants and primers; (v) interpretation of blueprints and shop drawings; (w) diagnosing problems and making any repairs relating to vehicular glazing; (x) operation of any hand and power operated equipment that is used in the trade; (y) carrying out damaged lite removal procedures and installation and sealing of new parts; (z) using the National Auto Glass Specifications Parts Book, including identification and selection of heat treated laminated bent glass parts and following cutting and edgework procedures for laminated flat glass in accordance with N.A.G. specifications. ------------------------------ Alberta Regulation 130/2000 Apprenticeship and Industry Training Act HEAVY EQUIPMENT TECHNICIAN TRADE REGULATION Filed: June 26, 2000 Made by the Alberta Apprenticeship and Industry Training Board on May 26, 2000 pursuant to section 33(2) of the Apprenticeship and Industry Training Act. Table of Contents Definitions 1 Constitution of the trade 2 Tasks, activities and functions 3 Educational requirements of an apprentice 4 Term of the apprenticeship program re heavy equipment technician 5 Term of the apprenticeship program re heavy duty equipment mechanic (off road) 6 Term of the apprenticeship program re truck and transport mechanic 7 Term of the apprenticeship program re truck-trailer mechanic 8 Employment of apprentices 9 Wages 10 Transitional 11 Repeal 12 Coming into force 13 Schedules Definitions 1 In this Regulation, (a) "apprentice" means a person who is an apprentice in the trade; (b) "certified journeyman" means a certified journeyman as defined in the Apprenticeship Program and Certification Regulation (AR 1/92); (c) "trade" means the trade of heavy duty mechanic that is designated as a compulsory certification trade pursuant to section 57 of the Apprenticeship and Industry Training Act and that is known under this Regulation as the trade of heavy equipment technician. Constitution of the trade 2 The following undertakings constitute the following branches of the trade: (a) in the case of the heavy equipment technician branch of the trade, the undertakings set out in section 2 of Schedule 1 constitute that branch of the trade; (b) in the case of the heavy duty equipment mechanic (off road) branch of the trade, the undertakings set out in section 2 of Schedule 2 constitute that branch of the trade; (c) in the case of the truck and transport mechanic branch of the trade, the undertakings set out in section 2 of Schedule 3 constitute that branch of the trade; (d) in the case of the truck-trailer mechanic branch of the trade, the undertakings set out in section 2 of Schedule 4 constitute that branch of the trade. Tasks, activities and functions 3 When practising or otherwise carrying out work in the trade, (a) in the case of the heavy equipment technician branch of the trade, the tasks, activities and functions set out in section 3 of Schedule 1 constitute that branch of the trade; (b) in the case of the heavy duty equipment mechanic (off road) branch of the trade, the tasks, activities and functions set out in section 3 of Schedule 2 constitute that branch of the trade; (c) in the case of the truck and transport mechanic branch of the trade, the tasks, activities and functions set out in section 3 of Schedule 3 constitute that branch of the trade; (d) in the case of the truck-trailer mechanic branch of the trade, the tasks, activities and functions set out in section 3 of Schedule 4 constitute that branch of the trade. Educational requirements of an apprentice 4 The educational requirement for an apprentice is (a) the completion of an Alberta grade 11 education or equivalent, or (b) the successful completion of one or more examinations that are set or recognized by the Board. Term of the apprenticeship program re heavy equipment technician 5(1) Subject to section 11 of the Apprenticeship Program and Certification Regulation (AR 1/92), the term of an apprenticeship program for the heavy equipment technician branch of the trade shall consist of 4 periods of not less than 12 months each. (2) In the first period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (3) In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (4) In the 3rd period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (5) In the 4th period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. Term of the apprenticeship program re heavy duty equipment mechanic (off road) 6(1) Subject to section 11 of the Apprenticeship Program and Certification Regulation (AR 1/92), the term of an apprenticeship program for the heavy duty equipment mechanic (off road) branch of the trade shall consist of 3 periods of not less than 12 months each. (2) In the first period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (3) In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (4) In the 3rd period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. Term of the apprenticeship program re truck and transport mechanic 7(1) Subject to section 11 of the Apprenticeship Program and Certification Regulation (AR 1/92), the term of an apprenticeship program for the truck and transport mechanic branch of the trade shall consist of 3 periods of not less than 12 months each. (2) In the first period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (3) In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. (4) In the 3rd period of the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. Term of the apprenticeship program re truck-trailer mechanic 8(1) Subject to section 11 of the Apprenticeship Program and Certification Regulation (AR 1/92), the term of an apprenticeship program for the truck-trailer mechanic branch of the trade shall consist of one period of not less than 12 months. (2) In the period that constitutes the apprenticeship program an apprentice must acquire not less than 1500 hours of on the job training and successfully complete the formal instruction that is required or approved by the Board. Employment of apprentices 9(1) A person shall not employ an apprentice except in accordance with this section. (2) A person who is a certified journeyman in a branch of the trade or employs a certified journeyman in that branch of the trade may employ one apprentice in that branch of the trade and one additional apprentice in that branch for each additional certified journeyman in that branch that is employed by that person. (3) For the purposes of subsection (2), (a) a person who is a certified journeyman in the heavy duty technician branch of the trade or employs a certified journeyman in that branch, instead of employing an apprentice in that branch of the trade, may, (i) in respect of undertakings that constitute the heavy duty equipment mechanic (off road) branch of the trade, employ an apprentice in the heavy duty mechanic (off road) branch of the trade to carry out any of the undertakings that constitute that branch of the trade; (ii) in respect of undertakings that constitute the truck and transport mechanic branch of the trade, employ an apprentice in the truck and transport branch of the trade to carry out any of the undertakings that constitute that branch of the trade; (iii) in respect of undertakings that constitute the truck-trailer mechanic branch of the trade, employ an apprentice in the truck-trailer mechanic branch of the trade to carry out any of the undertakings that constitute that branch of the trade; (b) a person who is a certified journeyman in the heavy duty equipment mechanic (off road) branch of the trade or employs a certified journeyman in that branch, instead of employing an apprentice in that branch of the trade, may, in respect of undertakings that constitute the truck-trailer mechanic branch of the trade, employ an apprentice in the truck-trailer mechanic branch of the trade to carry out any of the undertakings that constitute that branch of the trade; (c) a person who is a certified journeyman in the truck and transport mechanic branch of the trade or employs a certified journeyman in that branch, instead of employing an apprentice in that branch of the trade, may, in respect of undertakings that constitute the truck-trailer mechanic branch of the trade, employ an apprentice in the truck-trailer mechanic branch of the trade to carry out any of the undertakings that constitute that branch of the trade. Wages 10 Subject to the Employment Standards Code, a person employing an apprentice in a branch of the trade shall pay wages to an apprentice that are at least equal to the following percentages of the wages paid to employees who are certified journeymen in that branch of the trade: (a) in the case of an apprentice in an apprenticeship program in the heavy equipment technician branch of the trade, (i) 60% in the first period of the apprenticeship program; (ii) 70% in the 2nd period of the apprenticeship program; (iii) 80% in the 3rd period of the apprenticeship program; (iv) 90% in the 4th period of the apprenticeship program; (b) in the case of an apprentice in an apprenticeship program in the heavy duty equipment mechanic (off road) branch of the trade, (i) 60% in the first period of the apprenticeship program; (ii) 70% in the 2nd period of the apprenticeship program; (iii) 80% in the 3rd period of the apprenticeship program; (c) in the case of an apprentice in an apprenticeship program in the truck and transport mechanic branch of the trade, (i) 60% in the first period of the apprenticeship program; (ii) 70% in the 2nd period of the apprenticeship program; (iii) 80% in the 3rd period of the apprenticeship program; (d) in the case of an apprentice in an apprenticeship program in the truck-trailer mechanic branch of the trade, 60% during the period that constitutes the apprenticeship program. Transitional 11(1) In this section, (a) "existing apprentice" means a person who immediately before the coming into force of this Regulation was an apprentice in a previous apprenticeship program; (b) "new apprenticeship program" means an apprenticeship program under this Regulation; (c) "previous apprenticeship program" means an apprenticeship program under the previous Regulation; (d) "previous Regulation" means the Heavy Equipment Technician Trade Regulation (AR 130/94); (e) "qualifying criteria" means as of September 1, 2000 being eligible to attend formal instruction in the 2nd, 3rd or 4th period of the previous apprenticeship program and on and after September 1, 2000 continuing to be engaged in, and successfully completing the remaining formal instruction under, the previous apprenticeship program in a manner and within the time schedule set out by the Executive Director. (2) If an existing apprentice meets and continues to meet the qualifying criteria, that existing apprentice is entitled to complete the previous apprenticeship program as if the previous Regulation had not been repealed. (3) Where an existing apprentice ceases to meet the qualifying criteria, that existing apprentice, in order to continue to be an apprentice in an apprenticeship program in the trade, must meet the terms or conditions set out by the Executive Director to complete a new apprenticeship program. Repeal 12 The Heavy Equipment Technician Trade Regulation (AR 130/94) is repealed. Coming into force 13 This Regulation comes into force on July 1, 2000. SCHEDULE 1 HEAVY EQUIPMENT TECHNICIAN 1 In this Schedule, "heavy vehicles and equipment" means heavy vehicles and industrial heavy equipment, both towed and self-propelled, including any equipment and components required for the operation of those vehicles and equipment and, without limiting the generality of the foregoing, includes (a) internal combustion engines and components, both stationary and mobile; (b) tracked equipment, commonly called crawler tractors; (c) ground engaging equipment and components, including rippers, ditchers, backhoes, trenchers and similar equipment; (d) towed earth moving equipment, commonly called scrapers; (e) self-propelled earth moving equipment, commonly called motor scrapers; (f) rubber tired equipment, commonly called tractors; (g) on-highway and off-highway motor vehicles, commonly called trucks; (h) towed on-highway and off-highway vehicles, commonly called trailers; (i) miscellaneous equipment and components used in the transportation of and marketability of the vehicles and equipment referred to in clauses (a) to (h). 2 The undertakings that constitute the trade are the repair and maintenance of heavy vehicles and equipment and, without limiting the generality of the foregoing, include the repair, maintenance and replacement of (a) internal combustion engines and components; (b) power trains; (c) electrical systems; (d) hydraulic systems; (e) pneumatic systems; (f) steering systems; (g) braking systems; (h) wheels and tracked undercarriages; (i) frames, chassis, cabs, canopies and rollover protection structures; (j) heating and air-conditioning systems; (k) attachments, ground engaging tools, winches, cables and fifth wheels. 3 When practising or otherwise carrying out work in the trade, the following tasks, activities and functions come within the trade: (a) selecting, inspecting, using and maintaining various hand and power tools, measuring tools and testing equipment; (b) selecting, inspecting, using and maintaining various shop equipment; (c) selecting, installing or removing fasteners, tubing, piping, couplings, fittings, hoses, electrical wiring and connectors; (d) selecting, installing, inspecting, adjusting and removing bearings, bushings and seals, belts, sheaves, pulleys, chains and sprockets; (e) selecting proper fuels, lubricants, coolants, sealants, adhesives, plastics and plastic metals for intended application; (f) retrieving and inputting applicable information using service-related computer software programs; (g) inspecting, monitoring performance of and operating machinery and equipment; (h) assembling, testing, igniting and adjusting oxy-acetylene cutting and heating equipment and performing minor cutting and heating repairs; (i) with respect to internal combustion 2- and 4-cycle engines that use diesel, gasoline, LPG or alternative fuels, and engine auxiliary systems and accessories, (i) inspecting and testing (A) engines and engine components and engine systems in and out of chassis, before and after service or repair; (B) engine lubrication systems; (C) engine liquid cooling systems; (D) engine air cooling systems and air filtering or screening systems; (E) engine intake and exhaust systems; (F) fuel systems; (G) engine control systems; (ii) diagnosing engine problems; (iii) diagnosing malfunctions; (iv) repairing or replacing components; (v) analyzing parts for failure and determining the causes of the failure; (vi) removing and installing engines; (j) with respect to power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives and steering clutches and axles, (i) inspecting, testing and adjusting (A) clutches; (B) fluid drives, fluid couplings, torque converters, hydraulic retarders and other connecting units; (C) manual transmissions; (D) power shift transmissions, high-low speed units, reverse units and automatic transmissions and their control systems; (E) transfer drives; (F) drive shafts, u-joints, belt, chain and gear drives, mechanical winch drives, power take-offs and other drive lines; (G) front and rear differentials and axles; (H) steering clutches; (I) final drives; (ii) diagnosing malfunctions and irregular operation and performance; (iii) removing and installing (A) complete components; (B) complete transmissions; (C) complete gear box drives; (D) complete assemblies; (iv) removing, inspecting, overhauling, repairing and replacing (A) assemblies and their parts; (B) transmission parts and components; (C) transmission control systems and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (k) with respect to electrical systems and circuits, batteries, charging, starting, lighting and accessories systems, spark ignition systems, electronic systems and circuits, electronic monitoring systems and electronic control systems, (i) inspecting, testing, adjusting and replacing (A) storage batteries; (B) components and circuits; (ii) diagnosing performance; (iii) isolating defects within the system or in another part of the machine; (iv) analyzing failures and determining the causes of failures; (l) with respect to hydraulic and hydrostatic systems, open and closed centre hydraulic systems, open and closed loop hydrostatic systems and control systems, (i) inspecting, testing and adjusting (A) open and closed centre main hydraulic working systems; (B) open and closed hydrostatic drive and propel systems; (C) hydraulic control systems; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) testing, overhauling, repairing and replacing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (m) with respect to pneumatic systems and air supply and generating systems, (i) inspecting, testing and adjusting air systems; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) testing, overhauling, repairing or replacing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (n) with respect to steering, brakes and suspension systems, manual steering and brakes and hydraulic steering and brakes, air brakes and suspensions and electrical brakes, (i) inspecting, testing and adjusting (A) manual steering systems; (B) manual braking systems and brake foundation assemblies; (C) hydraulic equipment steering and braking systems; (D) air braking and suspension systems; (E) electrical braking systems; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) removing, testing, overhauling, repairing, replacing and installing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (o) with respect to frames, chassis, supporting structures, wheels and tracked undercarriages, cabs, cab pressuring, heating and air-conditioning systems, canopies and protective structures, (i) inspecting, measuring, removing and installing (A) frames, chassis, supporting structures and components of equipment and machinery; (B) wheels, rims and tires; (C) tracked undercarriages, components and parts; (D) cabs, canopies and protective structures; (ii) repairing and replacing (A) frames, chassis, supporting structures and components of equipment and machinery; (B) wheels, rims and tires; (C) tracked undercarriages, components and parts; (iii) adjusting and aligning frames, chassis, supporting structures and components of equipment and machinery; (iv) adjusting and aligning wheels where applicable and tracked undercarriages, components and parts; (v) adjusting, aligning and repairing assemblies; (vi) inspecting and testing cab pressurizing, heating and air conditioning systems; (vii) diagnosing and isolating problems and determining causes; (viii) replacing components and making repairs; (p) with respect to attachments, ground engaging and working tools, booms, structural members, cables, hooks and slings, (i) inspecting, adjusting, aligning, removing, installing, repairing and replacing equipment attachments and components; (ii) inspecting, aligning, removing, installing, repairing and replacing ground engaging equipment and working tools; (iii) inspecting and measuring booms, arms, masts and structural members for signs of misalignment, cracking, loose bolts, metal fatigue and overloading; (iv) analyzing failures and determining causes and correcting where applicable, or recommending speciality repair or welding; (v) inspecting, removing, installing and replacing equipment cables, hooks and slings; (q) with respect to preventive maintenance, operational safety and equipment economy, (i) identifying and evaluating equipment failures and malfunctions relating to machine maintenance; (ii) identifying unsafe operating practices; (iii) communicating (A) advice on maintenance to be performed; (B) maintenance safety precautions; (C) correct procedures for equipment inspections, operation, towing, loading, hauling, parking and storage; (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. SCHEDULE 2 HEAVY DUTY EQUIPMENT MECHANIC (OFF ROAD) 1 In this Schedule, "heavy vehicles and equipment" means heavy vehicles and industrial heavy equipment, both towed and self-propelled, including any equipment and components required for the operation of those vehicles and equipment and, without limiting the generality of the foregoing, includes (a) internal combustion engines and components, both stationary and mobile; (b) tracked equipment, commonly called crawler tractors; (c) ground engaging equipment and components, including rippers, ditchers, backhoes, trenchers and similar equipment; (d) towed earth moving equipment, commonly called scrapers; (e) self-propelled earth moving equipment, commonly called motor scrapers; (f) off-highway motor vehicles, commonly called trucks; (g) towed off-highway vehicles, commonly called trailers; (h) miscellaneous equipment and components used in the transportation of and marketability of the vehicles and equipment referred to in clauses (a) to (g). 2 The undertakings that constitute the trade are the repair and maintenance of heavy vehicles and equipment and, without limiting the generality of the foregoing, include the repair, maintenance and replacement of (a) internal combustion engines and components; (b) power trains; (c) electrical systems; (d) hydraulic systems; (e) pneumatic systems; (f) steering systems; (g) braking systems; (h) wheels and tracked undercarriages; (i) frames, chassis, cabs, canopies and rollover protection structures; (j) heating systems; (k) attachments, ground engaging tools, winches, cables and fifth wheels. 3 When practising or otherwise carrying out work in the trade, the following tasks, activities and functions come within the trade: (a) selecting, inspecting, using and maintaining various hand and power tools, measuring tools and testing equipment; (b) selecting, inspecting, using and maintaining various shop equipment; (c) selecting, installing or removing fasteners, tubing, piping, couplings, fittings, hoses, electrical wiring and connectors; (d) selecting, installing, inspecting, adjusting and removing bearings, bushings and seals, belts, sheaves, pulleys, chains and sprockets; (e) selecting proper fuels, lubricants, coolants, sealants, adhesives, plastics and plastic metals for intended application; (f) retrieving and inputting applicable information using service related computer software programs; (g) inspecting, monitoring performance of and operating machinery and equipment; (h) assembling, testing, igniting and adjusting oxy-acetylene cutting and heating equipment and performing minor cutting and heating repairs; (i) with respect to internal combustion 2- and 4-cycle engines that use diesel, gasoline, LPG or alternative fuels, and engine auxiliary systems and accessories, (i) inspecting and testing (A) engines and engine components and engine systems in and out of chassis, before and after service or repair; (B) engine lubrication systems; (C) engine liquid cooling systems; (D) engine air cooling systems and air filtering or screening systems; (E) engine intake and exhaust systems; (F) fuel systems; (G) engine control systems; (ii) diagnosing engine problems; (iii) diagnosing malfunctions; (iv) repairing or replacing components; (v) analyzing parts for failure and determining the causes of the failure; (vi) removing and installing engines; (j) with respect to power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives and steering clutches and axles, (i) inspecting, testing and adjusting (A) clutches; (B) fluid drives, fluid couplings, torque converters, hydraulic retarders and other connecting units; (C) manual transmissions; (D) power shift transmissions, high-low speed units, reverse units and automatic transmissions and their control systems; (E) transfer drives; (F) drive shafts, u-joints, belt, chain and gear drives, mechanical winch drives, power take-offs and other drive lines; (G) front and rear differentials and axles; (H) steering clutches; (I) final drives; (ii) diagnosing malfunctions and irregular operation and performance; (iii) removing and installing (A) complete components; (B) complete transmissions; (C) complete gear box drives; (D) complete assemblies; (iv) removing, inspecting, overhauling, repairing and replacing (A) assemblies and their parts; (B) transmission parts and components; (C) transmission control systems and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (k) with respect to electrical systems and circuits, batteries, charging, starting, lighting and accessories systems, spark ignition systems, electronic systems and circuits, electronic monitoring systems and electronic control systems, (i) inspecting, testing, adjusting and replacing (A) storage batteries; (B) components and circuits; (ii) diagnosing performance; (iii) isolating defects within the system or in another part of the machine; (iv) analyzing failures and determining the causes of failures; (l) with respect to hydraulic and hydrostatic systems, open and closed centre hydraulic systems, open and closed loop hydrostatic systems and control systems, (i) inspecting, testing and adjusting (A) open and closed centre main hydraulic working systems; (B) open and closed hydrostatic drive and propel systems; (C) hydraulic control systems; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) testing, overhauling, repairing and replacing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (m) with respect to pneumatic systems and air supply and generating systems, (i) inspecting, testing and adjusting air systems; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) testing, overhauling, repairing or replacing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (n) with respect to steering, brakes and suspension systems, manual steering and brakes and hydraulic steering and brakes, air brakes and suspensions and electrical brakes, (i) inspecting, testing and adjusting (A) manual steering systems; (B) manual braking systems and brake foundation assemblies; (C) hydraulic equipment steering and braking systems; (D) air braking and suspension systems; (E) electrical braking systems; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) removing, testing, overhauling, repairing, replacing and installing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (o) with respect to frames, chassis, supporting structures, wheels and tracked undercarriages, cabs, cab pressuring, heating systems, canopies and protective structures, (i) inspecting, measuring, removing and installing (A) frames, chassis, supporting structures and components of equipment and machinery; (B) wheels, rims and tires; (C) tracked undercarriages, components and parts; (D) cabs, canopies and protective structures; (ii) repairing and replacing (A) frames, chassis, supporting structures and components of equipment and machinery; (B) wheels, rims and tires; (C) tracked undercarriages, components and parts; (iii) adjusting and aligning frames, chassis, supporting structures and components of equipment and machinery; (iv) adjusting and aligning wheels where applicable and tracked undercarriages, components and parts; (v) adjusting, aligning and repairing assemblies; (vi) inspecting and testing cab pressurizing and heating systems; (vii) diagnosing and isolating problems and determining causes; (viii) replacing components and making repairs; (p) with respect to attachments, ground engaging and working tools, booms, structural members, cables, hooks and slings, (i) inspecting, adjusting, aligning, removing, installing, repairing and replacing equipment attachments and components; (ii) inspecting and measuring booms, arms, masts and structural members for signs of misalignment, cracking, loose bolts, metal fatigue and overloading; (iii) analyzing failures and determining causes and correcting where applicable, or recommending speciality repair or welding; (iv) inspecting, removing, installing and replacing equipment cables, hooks and slings; (q) with respect to preventive maintenance, operational safety and equipment economy, (i) identifying and evaluating equipment failures and malfunctions relating to machine maintenance; (ii) identifying unsafe operating practices; (iii) communicating (A) advice on maintenance to be performed; (B) maintenance safety precautions; (C) correct procedures for equipment inspections, operation, towing, loading, hauling, parking and storage; (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. SCHEDULE 3 TRUCK AND TRANSPORT MECHANIC 1 In this Schedule, "truck and transport vehicles" means on-highway vehicles, both towed and self-propelled, including any equipment and components required for the operation of those vehicles and without limiting the generality of the foregoing, includes (a) internal combustion engines and components, both stationary and mobile; (b) on-highway vehicles, commonly called trucks and buses; (c) towed on-highway and off-highway vehicles, commonly called trailers; (d) miscellaneous equipment and components used in the transportation of and marketability of the vehicles and equipment referred to in clauses (a) to (c). 2 The undertakings that constitute the trade are the repair and maintenance of truck and transport vehicles and, without limiting the generality of the foregoing, include the repair, maintenance and replacement of (a) internal combustion engines and components; (b) power trains; (c) electrical systems; (d) hydraulic systems; (e) pneumatic systems; (f) steering systems; (g) braking systems; (h) wheels and suspension; (i) frames, chassis and cabs; (j) heating and air-conditioning systems; (k) attachments, winches, cables and fifth wheels. 3 When practising or otherwise carrying out work in the trade, the following tasks, activities and functions come within the trade: (a) selecting, inspecting, using and maintaining various hand and power tools, measuring tools and testing equipment; (b) selecting, inspecting, using and maintaining various shop equipment; (c) selecting, installing or removing fasteners, tubing, piping, couplings, fittings, hoses, electrical wiring and connectors; (d) selecting, installing, inspecting, adjusting and removing bearings, bushings and seals, belts, sheaves, pulleys, chains and sprockets; (e) selecting proper fuels, lubricants, coolants, sealants, adhesives, plastics and plastic metals for intended application; (f) retrieving and inputting applicable information using service related computer software programs; (g) inspecting, monitoring performance of and operating machinery and equipment; (h) assembling, testing, igniting and adjusting oxy-acetylene cutting and heating equipment and performing minor cutting and heating repairs; (i) with respect to internal combustion 2- and 4-cycle engines that use diesel, gasoline, LPG or alternative fuels, and engine auxiliary systems and accessories, (i) inspecting and testing (A) engines and engine components and engine systems in and out of chassis, before and after service or repair; (B) engine lubrication systems; (C) engine liquid cooling systems; (D) engine air cooling systems and air filtering or screening systems; (E) engine intake and exhaust systems; (F) fuel systems; (G) engine control systems; (ii) diagnosing engine problems; (iii) diagnosing malfunctions; (iv) repairing or replacing components; (v) analyzing parts for failure and determining the causes of the failure; (vi) removing and installing engines; (j) with respect to power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives and axles, (i) inspecting, testing and adjusting (A) clutches; (B) fluid drives, fluid couplings, torque converters, hydraulic retarders and other connecting units; (C) manual transmissions; (D) power shift transmissions, high-low speed units, reverse units and automatic transmissions and their control systems; (E) transfer drives; (F) drive shafts, u-joints, belt, chain and gear drives, mechanical winch drives, power take-offs and other drive lines; (G) front and rear differentials and axles; (ii) diagnosing malfunctions and irregular operation and performance; (iii) removing and installing (A) complete components; (B) complete transmissions; (C) complete gear box drives; (D) complete assemblies; (iv) removing, inspecting, overhauling, repairing and replacing (A) assemblies and their parts; (B) transmission parts and components; (C) transmission control systems and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (k) with respect to electrical systems and circuits, batteries, charging, starting, lighting and accessories systems, spark ignition systems, electronic systems and circuits, electronic monitoring systems and electronic control systems, (i) inspecting, testing, adjusting and replacing (A) storage batteries; (B) components and circuits; (ii) diagnosing performance; (iii) isolating defects within the system or in another part of the machine; (iv) analyzing failures and determining the causes of failures; (l) with respect to hydraulic and hydrostatic systems, open and closed centre hydraulic systems, open and closed loop hydrostatic systems and control systems, (i) inspecting, testing and adjusting; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) testing, overhauling, repairing and replacing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (m) with respect to pneumatic systems and air supply and generating systems, (i) inspecting, testing and adjusting air systems; (ii) diagnosing malfunctions; (iii) removing and installing components as a unit; (iv) testing, overhauling, repairing and replacing parts and components; (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (n) with respect to steering, brakes and suspension systems, manual steering and brakes, and hydraulic steering and brakes, air brakes and suspensions and electrical brakes, (i) inspecting, testing and adjusting (A) manual steering systems; (B) manual braking systems and brake foundation assemblies; (C) hydraulic equipment steering and braking systems; (D) electrical braking systems; (E) air braking and suspension systems; (o) with respect to frames, chassis, supporting structures and components, (i) inspecting, repairing and replacing wheels, rims and tires; (ii) adjusting and aligning frames, chassis, supporting structures and components; (iii) adjusting and aligning wheels where applicable; (iv) adjusting, aligning and repairing assemblies; (v) inspecting and testing cab pressurizing, heating and air-conditioning systems; (vi) diagnosing and isolating problems and determining causes; (vii) replacing components and making repairs; (p) with respect to attachments and working tools, structural members, cables, hooks and slings, (i) inspecting, adjusting, aligning, removing, installing, repairing and replacing vehicle attachments and components; (ii) inspecting and measuring structural members for signs of misalignment, cracking, loose bolts, metal fatigue and overloading; (iii) analyzing failures and determining causes and correcting where applicable, or recommending speciality repair or welding; (iv) inspecting, removing, installing and replacing equipment cables, hooks and slings; (q) with respect to preventive maintenance, operational safety and vehicle economy, (i) identifying and evaluating component failures and malfunctions relating to vehicles; (ii) identifying unsafe operating practices; (iii) communicating (A) advice on maintenance to be performed; (B) maintenance safety precautions; (C) correct procedures for vehicle inspections, operation, towing, loading, hauling, parking and storage; (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. SCHEDULE 4 TRUCK-TRAILER MECHANIC 1 In this Schedule, "truck-trailer" means a commercial transport device connected to or moved by a power unit, and includes the following: (a) a flat deck; (b) a dry freight van; (c) a refrigerated van; (d) a tanker; (e) a converter; (f) a booster; (g) a pole trailer; (h) a jeep; (i) a steering dolly; (j) a dump trailer; (k) any other commercial pull type device. 2 The undertakings that constitute the trade are the repair, maintenance and inspection of truck-trailers, and without limiting the generality of the foregoing, include the repair, maintenance, replacement and inspection of the following: (a) suspensions and undercarriages; (b) braking systems; (c) electrical systems; (d) bodies; (e) tires and wheels; (f) couplers and hitches; (g) steering systems; (h) landing gear. 3 When practising or otherwise carrying out work in the trade, the following tasks, activities and functions come within the trade: (a) the identification and application of and compliance with government and company policies, procedures, guidelines and standards with respect to (i) replacement and repair of defective parts; (ii) quality service procedures; (iii) inspection and safety hazard reports; (iv) manufacturers' service manuals and related service materials; (b) the use, maintenance and operation of hand tools, hand power tools and pneumatic electrical power and specialty tools, lifting devices and testing equipment; (c) the repair, maintenance and visual inspection of trailers, with respect to leaks, deterioration, brakes, alignment, tracking, position and wear characteristics, limits and damage; (d) the repair, maintenance and inspection of the following: (i) suspension and undercarriages, with respect to (A) slider and fixed suspension systems and their components; (B) air suspension systems and their components, including air bags, control valves, shock absorbers, axle connections, air pressure gauges, auxiliary control systems, air lines and air tanks; (C) block suspension systems and their components, including load cushions, wish-bone and tracking arms and torque arms and bushings; (D) walking beam suspension systems, including walking beams, axle connections and trunnion shaft assemblies; (E) spring suspension systems and their components, including multi-leaf assemblies, equalizers, hangers and guides, spring seats, bottom axle brackets, top spring plates and front and rear spring hangers; (F) torque arms and bushings and their components; (ii) braking systems, with respect to (A) brakes, brake linings, drums, discs, brake chambers, air tanks, valves, glad hands, lines and hoses; (B) cam shafts, including cam shaft bushings, bushing support brackets, slack adjusters, hardware kits and spiders; (C) air braking systems, including calipers and actuators and anchor plates; (D) anti-lock braking systems, including electro-magnets, wiring, wheel sensors and excitors; (E) axles and wheel hubs, including grease, oil caps and seals, cups and bearings, dust shields and studs and axles; (F) tires and wheel rims, including valve stems and caps, tire pressure, rim and lock rings and rim spacers; (G) hydraulic brakes and their components and functions, including type of brake fluid, master cylinders, wheel cylinders, brake lines, brake shoes and assemblies; (H) electric brakes and their components and functions, including servos and control units and the principles of operation; (iii) trailer couplers and hitches, with respect to (A) coupling units; (B) fasteners, plungers, sliding fifth wheel plungers and control mechanisms and sliding racks; (C) air release cylinder lines, hoses and fittings; (D) fifth wheel saddles, bushings and pins, fifth wheel mounting components and fifth wheel compensators and components; (E) king-pins and upper coupler assemblies and turntables; (F) rubber bushed hitch eyes, safety chains, cables and attachments, draw bars and attachments, pintle hooks and ball hitches; (iv) landing gear with respect to mounting brackets, braces, fasteners and manual and support legs; (v) electrical systems, with respect to (A) location of lamps, connections, boxes, wiring, sockets, wiring supports and harnesses; (B) wiring colour codes, interpretation of wiring diagrams, defects, grounds and broken wires and corroded or damaged wiring and wiring harnesses and supports; (vi) body units, with respect to structural integrity, including (A) aluminum, steel and stainless steel components of body units; (B) interior and exterior of trailers, including cracked or broken floors, main rails, broken or bent panels and side posts, roof and roof bows, side walls, bottom rails, cross members and upper couplers; (C) doors, including door seals and rollers, tracks and hardware; (D) loose fasteners; (E) shells, long and cross members and bumpers. ------------------------------ Alberta Regulation 131/2000 Public Utilities Board Act DESIGNATION REGULATION Filed: June 28, 2000 Made by the Lieutenant Governor in Council (O.C. 247/2000) on June 28, 2000 pursuant to sections 91.1 and 99 of the Public Utilities Board Act. Designated public utilities 1 Sections 91.1 and 92 of the Public Utilities Board Act apply to the following owners of public utilities: (a) AltaGas Utility Holdings Inc.; (b) ATCO Electric Ltd.; (c) Canadian Utilities Limited; (d) CanUtilities Holdings Ltd.; (e) CU Inc.; (f) CU Water Limited; (g) TransAlta Corporation; (h) TransAlta Utilities Corporation; (i) Sarcee Developments Ltd.; (j) Upper Lakes Group Inc. Designated public utilities 2 Section 99 of the Public Utilities Board Act applies to the following owners of public utilities: (a) AltaGas Utility Holdings Inc.; (b) AltaGas Utilities Inc.; (c) ATCO Electric Ltd.; (d) ATCO Gas and Pipelines Ltd.; (e) Bonnyville Gas Company Limited; (f) CanUtilities Holdings Ltd.; (g) Canadian Utilities Limited; (h) CU Inc.; (i) CU Water Limited; (j) Northwestern Utilities Limited; (k) NOVA Gas Transmission Ltd.; (l) Orr Mineral Developments Ltd.; (m) TransAlta Corporation; (n) TransAlta Utilities Corporation; (o) Sarcee Developments Ltd.; (p) Upper Lakes Group Inc. 3 The Designation Regulation (AR 173/85) is repealed. 4 For the purpose of ensuring that this Regulation is reviewed for ongoing relevancy and necessity, with the option that it may be repassed in its present or an amended form following a review, this Regulation expires on November 30, 2005. Alberta Regulation 132/2000 Surrogate Court Act Dependent Adults Act SURROGATE RULES AMENDMENT REGULATION Filed: June 28, 2000 Made by the Lieutenant Governor in Council (O.C. 250/2000) on June 28, 2000 pursuant to section 19 of the Surrogate Court Act and section 69 of the Dependent Adults Act. 1 The Surrogate Rules (AR 130/95) are amended by this Regulation. 2 Rule 10(1)(d) is amended by striking out "particular purpose" and substituting "limited purpose". 3 Rule 13(2) is amended (a) by repealing clause (a)(vii); (b) by adding the following after clause (b)(viii): (ix) Form NC 21 4 Rule 26(3)(a) is repealed and the following is substituted: (a) by registered mail, or 5 Rule 33 is amended by striking out "On an application for a grant of administration or a grant of administration with will annexed," and substituting "On an application for a grant of probate or a grant of administration,". 6 Rule 84(2) is amended by adding "and subject to pre-trial discovery of documents and oral examinations for discovery" before "respecting". 7 Rule 98(3) is amended by striking out "but each entry must be numbered consecutively" and substituting "and each entry may be numbered consecutively". 8 Rule 119(1) is amended by adding the following after clause (h): (i) any personal benefit received by the trustee or members of the trustee's family; (j) any personal use of the dependent's property by the trustee or the trustee's family. 9 Rule 129(1) is amended by adding "on notice to the Public Trustee," after "The court,". 10 Rules 137 to 140 are repealed. 11 Schedule 2 is amended by repealing the fees specified in section 1 under the heading Court Fees and substituting the following: 1(1) For issuing grants of probate or letters of administration or resealing grants, excluding trusteeship but including one certified copy of the document, where the net value of property in Alberta is (a) $10 000 or under $ 25 (b) over $10 000 but not more than $25 000 100 (c) over $25 000 but not more than $125 000 200 (d) over $125 000 but not more than $250 000 300 (e) over $250 000 400 (2) This section applies to all grants of probate and letters of administration issued on or after February 25, 2000 and the grants resealed on or after February 25, 2000. (3) This section comes into force on July 1, 2000. 12 In Schedule 3 Forms NC 2, NC 7, NC 19, NC 21, NC 22 and NC 24.1, C4, DA 5 and DA 15 are repealed and the following are substituted: NC 2 COURT FILE NUMBER COURT Surrogate Court of Alberta JUDICIAL DISTRICT ESTATE NAME DOCUMENT Affidavit by the personal representative(s) on application for a grant of DEPONENT(S) NAME(S) DATE OF AFFIDAVIT THE DEPONENT(S) EACH SWEAR UNDER OATH OR AFFIRM THAT THE INFORMATION IN THIS AFFIDAVIT AND IN THE ATTACHED SCHEDULES IS WITHIN THE DEPONENTS' KNOWLEDGE AND IS TRUE. WHERE THE INFORMATION IS BASED ON ADVICE OR INFORMATION AND BELIEF, THIS IS STATED. Applicant(s) 1. The applicant(s) are entitled to apply for a grant because the applicant(s) are Schedules Attached 2. The following schedules are part of this affidavit. They are correct to the deponents' information and belief. 2.1 NC 3 Schedule 1 Deceased 2.2 NC 4 Schedule 2 Will 2.3 NC 5 Schedule 3 Personal representative(s) 2.4 NC 6 Schedule 4 Beneficiaries 2.5 NC 7 Schedule 5 Inventory Documents Attached 3. The following documents are part of this affidavit. 3.1 Original will of the deceased 3.2 NC 8 Affidavit of witness to a will The schedules and documents that are part of this affidavit provide all the information required in this application by the Surrogate Rules and have been prepared by me or by my lawyer on my behalf. Notices 4. The applicant(s) have served the following notices as required and in the manner prescribed by the Surrogate Rules. 4.1 NC 19 Notice(s) to beneficiaries (residuary) 4.2 NC 20 Notice(s) to beneficiaries (non residuary) 4.3 NC 21 Notice(s) to beneficiaries (intestacy) 4.4 NC 22 Notice to spouse of deceased Matrimonial Property Act 4.5 NC 23 Notice to spouse of deceased Family Relief Act 4.6 NC 24 Notice to a dependent child of the deceased Family Relief Act 5. The applicant(s) will faithfully administer the estate of the deceased according to law and will give a true accounting of their administration to the persons entitled to it when lawfully required. SWORN OR AFFIRMED BY EACH DEPONENT BEFORE A COMMISSIONER FOR OATHS AT , ALBERTA ON Deponent Commissioner's Name: Appointment Expiry Date: NC 7 ESTATE NAME DOCUMENT Schedule 5: Inventory of property and debts VALUE OF ESTATE IN ALBERTA Land and buildings (net of encumbrances) $ Other property (gross) $ Gross value of estate $ Debts (excluding encumbrances of land) $ Net value of estate $ PROPERTY LAND AND BUILDINGS Description: Gross value: $ Encumbrances: Net value: $ OTHER PROPERTY Description: Gross value: $ TOTAL VALUE OF PROPERTY $ DEBTS Description: Value: $ TOTAL VALUE OF DEBTS $ NET VALUE OF ESTATE $ NC 19 ESTATE NAME DOCUMENT Notice to beneficiaries (residuary) To: Name: Complete address: You are named as a residuary beneficiary in the last will of . The will gives you . The personal representative(s) named in the will have applied for a grant of probate. Enclosed with this notice is a copy of the application for a grant of probate. This includes a copy of the will and a list of the estate property and debts. Once the court issues the grant, the personal representative(s) will collect in the property, pay the debts, and complete the administration of the estate and anything else required of the personal representative(s). Then they will be in a position to account to you before distributing any estate left after payment of all debts and expenses. By issuing the grant, the court is not approving the figures submitted in the application for a grant of probate. It is the responsibility of the beneficiary(ies) to supervise the actions of the personal representative(s). You can contact ________ at ________ , phone __________ , for any further information you may need. Personal Representative Date Name: Complete address: NC 21 ESTATE NAME DOCUMENT Notice to Beneficiaries (intestacy) To: Name: Complete address: died without leaving a will. In this circumstance, the provisions of the Intestate Succession Act of Alberta determine which relatives of the deceased inherit the estate. You are one of these relatives, or beneficiary (intestacy), and you will receive . has applied for a grant of administration. Enclosed with this notice is a copy of the application for a grant of administration. This includes a list of the property and debts. Once the court issues the grant, the personal representative(s) will collect in the property, pay the debts, and complete the administration of the estate and anything else required of the personal representative(s). Then they will be in a position to account to you before distributing any estate left after payment of all debts and expenses. By issuing the grant, the court is not approving the figures submitted in the application for a grant of administration. It is the responsibility of the beneficiary(ies) to supervise the actions of the personal representative(s). You can contact at , phone , for any further information you may need. Personal Representative Date Name: Complete address: NC 22 ESTATE NAME DOCUMENT Notice to spouse of deceased Matrimonial Property Act To: Name: Complete address: The law requires that this notice must be given to you because 1. you are the spouse or a former spouse (as defined in the Act) of ; 2. you have not been given all the property in the estate; 3. your marriage to the deceased ended or separation occurred less than two years prior to the date of death. You may have a claim under the Matrimonial Property Act on the property in the estate. This must be dealt with before the estate can be finally distributed. There are some time requirements that must be met. You must begin any application before six months have gone by from the date the court issued the grant of probate or administration. There are other time limits in the Act which may mean that in your case you have less than six months in which to act. If you want to take this further, you must consult your own lawyer immediately. Personal Representative Date Name: Complete address: I ACKNOWLEDGE RECEIPT OF THIS NOTICE AND OF A COPY OF THE APPLICATION FOR A GRANT OF IN THE ESTATE OF . NC 24.1 ESTATE NAME DOCUMENT Notice to the Public Trustee on Behalf of This gives you notice that the personal representative shown in the attached copy of an Application for a grant of has applied for this grant. Notice is given to you under section 6 of the Administration of Estates Act (beneficiaries interested in the estate) a minor at the date of death of the deceased Name: Address: Date of Birth: a missing person Name: Address: a dependent adult for whose estate you are trustee Name: Address: under section 7 of the Administration of Estates Act (family relief dependents) the deceased was survived by a minor child of the deceased Name: Address: Date of Birth: the deceased was survived by a dependent adult child for whose estate you are trustee Name: Address: Enclosed is your inspection fee of $ Personal Representative Date Name: Complete address: To the Surrogate Court of Alberta and the personal representative The Public Trustee does not intend to be represented on this application intends to be represented on this application makes these submissions: will not monitor the trust for the benefit of , named minor in clause of the Will, nor represent the minor's interest in the trust. Public Trustee of Alberta Date C 4 COURT FILE NUMBER COURT Surrogate Court of Alberta JUDICIAL DISTRICT ESTATE NAME WARNING TO CAVEATOR(S) To: YOU FILED A CAVEAT WHICH REQUIRES THAT NOTICE MUST BE GIVEN TO YOU OF ANY APPLICATION WHICH MIGHT BE MADE IN THIS ESTATE. THE FOLLOWING APPLICATION HAS BEEN MADE: Nature of application Grant of Date of will Applicant(s) name(s) and address(es) Lawyers for applicant(s): Name Complete address Responsible lawyer File No. Phone Fax Complete address for service on applicants BE WARNED: If you want to contest this application, you must file a notice of objection to an informal grant on the enclosed Form called "Notice of objection to informal grant". You must state: 1. That you object to this application; and 2. The nature of your objection. THERE IS A DEADLINE FOR FILING YOUR NOTICE OF OBJECTION. If you do not file your notice of objection by the deadline, the court will: 3. Deal with the application for an informal grant without any further notice to you; and 4. Assume that you consent to the application. Your notice of objection must be filed within 10 days of the date of service with the Clerk of the Surrogate Court Clerk of the Surrogate Court Date DA 5 DEPENDENT ADULT NAME DOCUMENT Schedule 1: Inventory of property and debts Dependent Adults Act VALUE OF ESTATE AS OF Land and buildings (net of encumbrances) $ Other property (gross) $ Gross value of estate $ Debts (excluding encumbrances of land) $ Net value of estate $ PROPERTY LAND AND BUILDINGS Description: Gross value: $ Encumbrances: Net value: $ OTHER PROPERTY Description: Gross value: $ TOTAL VALUE OF PROPERTY $ DEBTS Description: Value: $ TOTAL VALUE OF DEBTS $ NET VALUE OF ESTATE $ INCOME SOURCES Description: Monthly account: $ TOTAL MONTHLY INCOME $ EXPENSES Description: Monthly account: $ TOTAL MONTHLY EXPENSES $ DA 15 COURT FILE NUMBER COURT Surrogate Court of Alberta JUDICIAL DISTRICT DEPENDENT ADULT NAME PROCEDURE Application by the trustee(s) to pass accounts formally Dependent Adults Act DOCUMENT Notice of Reference to Public Trustee 1 The financial statements submitted to the Surrogate Court for the period to by are referred to the Public Trustee. 2 The reference to the Public Trustee is to determine whether certain expenditures shown on the financial statements are appropriate under the Dependent Adults Act, the Public Trustee Act and general trust law. 3 The items referred to the Public Trustee from the financial statements are items numbered : item # item # item # 4 The Public Trustee will report the results of the examination to the Surrogate Court and the parties by . 5 All accounting documentation is available to the Public Trustee. 6 The Public Trustee's fee plus necessary disbursements is to be charged against . ORDER: ISSUE THIS DIRECTION JUDGE OF THE SURROGATE DATE OF ALBERTA 13 The following Form is added after Form NC 24.1: NC 24.2 COURT FILE NUMBER COURT Surrogate Court of Alberta JUDICIAL DISTRICT ESTATE NAME PROCEDURE Application for grant - direction to monitor DOCUMENT Notice DIRECTION 1. The Surrogate Court has determined that the trust for the benefit of must be monitored by the Public Trustee. Either the applicant or the Public Trustee, on notice to the other, must arrange for the court to settle the terms and conditions of the appointment. Issue this direction Clerk of the Surrogate Court Date 14 This Regulation comes into force on July 1, 2000. ------------------------------ Alberta Regulation 133/2000 Public Sector Pension Plans Act LOCAL AUTHORITIES PENSION PLAN AMENDMENT REGULATION Filed: June 28, 2000 Made by the Lieutenant Governor in Council (O.C. 255/2000) on June 28, 2000 pursuant to Schedule 1, section 4 of the Public Sector Pension Plans Act. 1 The Local Authorities Pension Plan (AR 366/93) is amended by this Regulation. 2 Part 1 of Schedule 2 is amended by adding the following bodies to the list in that Part in their appropriate alphabetical order: (a) Alberta Fire Training School; (b) Alberta Irrigation Projects Association; (c) Cold Lake Ambulance Society; (d) Lamont - Two Hills Business Development Corporation. 3 Section 2, so far as it relates to (a) clause (b) of that section, is deemed to have come into force on October 1, 1999, (b) clauses (a) and (c) of that section, is deemed to have come into force on January 1, 2000, and (c) clause (d) of that section, is deemed to have come into force on April 1, 2000. ------------------------------ Alberta Regulation 134/2000 Marketing of Agricultural Products Act EGG PRODUCTION AND MARKETING AMENDMENT REGULATION Filed: June 29, 2000 Made by the Alberta Egg Producers Board on June 15 and 16, 2000 pursuant to sections 26 and 27 of the Marketing of Agricultural Products Act. 1 The Egg Production and Marketing Regulation (AR 293/97) is amended by this Regulation. 2 Section 24(1) is amended by striking out "$4.56" and substituting "$6.00". 3 Section 24.1(1) is amended by striking out "$0.19" and substituting "$.25". 4 This Regulation comes into force on July 9, 2000. Alberta Regulation 135/2000 Wildlife Act WILDLIFE AMENDMENT REGULATION Filed: June 29, 2000 Made by the Minister of Environment (M.O. 44/2000) on June 27, 2000 pursuant to sections 15, 25 and 96 of the Wildlife Act. 1 The Wildlife Regulation (AR 143/97) is amended by this Regulation. 2 The following is added in Schedule 8 after the "NOTE" preceding Part 1: For the purposes only of applying the preceding "NOTE", licences that were the subject-matter of an amendment under section 1 or 2 of the Fees (Reduction of Certain Fees Charged by the Wildlife Regulation) Regulation (AR 58/2000) and that were issued on or after April 1, 1999 and before the commencement of that Regulation are to be deemed to have been issued immediately after the commencement of that Regulation. 3 Part 1 of Schedule 8 is repealed and is substituted by the Part set out in the Schedule to this Regulation. 4 Items 10, 11 and 12 of Part 2 of Schedule 8 are repealed and the following is substituted: 10 Resident bow hunting permit FREE 11 Non-resident bow hunting permit 7.25 12 Non-resident alien bow hunting permit 14.00 5 This Regulation comes into force on July 2, 2000. SCHEDULE PART 1 RECREATIONAL LICENCES Column 1 Column 2 Column 3 Item No. Licence Fee ($) Resident Licences 1 Resident black bear licence 5.25 2 Resident supplemental black bear licence 6.25 3 Resident cougar licence 39.00 4 Resident mule deer licence 9.75 5 Resident white-tailed deer licence 9.75 6 Resident supplemental antlerless white-tailed deer licence 8.75 7 Resident antlerless deer licence 1.50 8 Resident elk licence 19.75 9 Resident moose licence 9.75 10 Resident trophy sheep licence 39.00 11 Resident WMU 410 trophy sheep special licence 39.00 12 Resident trophy sheep special licence 39.00 13 Resident goat special licence 40.00 14 Resident non-trophy sheep special licence 17.50 15 Resident antlered moose special licence 10.25 16 Resident calf moose special licence 11.25 17 Resident antlerless moose special licence 11.25 18 Resident antlered elk special licence 21.25 19 Resident antlerless elk special licence 21.25 20 Resident trophy antelope special licence 39.00 21 Resident non-trophy antelope special licence 7.75 22 Resident antelope archery special licence 39.00 23 Resident Cypress Hills elk special licence 21.25 24 Resident Cypress Hills elk archery licence 21.25 25 Resident WMU 212 antlerless elk archery licence 9.75 26 Resident WMU 300 elk special licence 21.25 27 Resident antlered mule deer special licence 11.25 28 Resident antlerless mule deer special licence - if issued to a youth FREE - if issued to an individual who is not a youth FREE 29 Resident youth mule deer licence 0.25 30 Resident antlered white-tailed deer special licence 11.25 31 Resident antlerless white-tailed deer special licence 6.50 32 Resident youth white-tailed deer licence 0.25 33 Resident Strathcona white-tailed deer licence 6.50 34 Resident Foothills deer licence 6.50 35 Resident Camp Wainwright deer special licence 27.00 36 Resident grizzly bear special licence 39.00 37 Resident game bird licence 0.75 38 Resident youth game bird licence 0.25 39 Resident pheasant licence FREE 40 Resident Merriam's turkey special licence 16.00 41 Resident quota licence 7.50 Non-resident Licences 42 Non-resident black bear licence 49.50 43 Non-resident supplemental black bear licence 49.50 44 Non-resident black bear special licence 49.50 45 Non-resident cougar licence 113.25 46 Non-resident cougar special licence 113.25 47 Non-resident antlered mule deer licence 101.75 48 Non-resident antlered mule deer special licence 101.75 49 Non-resident antlered white-tailed deer licence 101.75 50 Non-resident antlered white-tailed deer special licence 101.75 51 Non-resident antlered elk licence 113.25 52 Non-resident antlered elk special licence 113.25 53 Non-resident antlered moose licence 113.25 54 Non-resident antlered moose special licence 113.25 55 Non-resident trophy antelope special licence 155.25 56 Non-resident game bird licence 21.25 57 Non-resident 3-day game bird licence 13.25 58 Non-resident pheasant licence FREE Non-resident Alien Licences 59 Non-resident alien black bear special licence 61.25 60 Non-resident alien cougar special licence 215.75 61 Non-resident alien antlered mule deer special licence 157.25 62 Non-resident alien antlered white-tailed deer special licence 157.25 63 Non-resident alien antlered elk special licence 215.75 64 Non-resident alien antlered moose special licence 215.75 65 Non-resident alien trophy antelope special licence 193.25 66 Non-resident alien game bird licence 76.25 67 Non-resident alien 3-day game bird licence 50.00 68 Non-resident alien pheasant licence FREE 69 Non-resident alien trophy sheep special licence 274.00 Other Licences 70 Non-resident/non-resident alien wolf/coyote licence 2.00 71 Non-resident/non-resident alien trophy sheep special licence 274.00 72 Minister's special licence FREE ------------------------------ Alberta Regulation 136/2000 Fisheries (Alberta) Act FISHERIES (MINISTERIAL) AMENDMENT REGULATION Filed: June 29, 2000 Made by the Minister of Environment (M.O. 45/2000) on June 27, 2000 pursuant to section 44 of the Fisheries (Alberta) Act. 1 The Fisheries (Ministerial) Regulation (AR 220/97) is amended by this Regulation. 2 The following is added in Schedule 1 after the "NOTE" at the beginning: For the purposes only of applying the preceding "NOTE", sportfishing licences that were the subject-matter of an amendment under section 1 of the Fees (Reduction of Certain Fees Charged by the Fisheries (Ministerial) Regulation) Regulation (AR 57/2000) and that were issued on or after March 15, 1999 and before the commencement of that Regulation are to be deemed to have been issued immediately after the commencement of that Regulation. 3 Item 1(a) and (b) of Schedule 1 are repealed and the following is substituted: (a) resident of Canada $1.50 (b) non-resident of Canada (annual) 9.50 4 This Regulation comes into force on July 2, 2000. ------------------------------ Alberta Regulation 137/2000 Fair Trading Act AUTOMOTIVE BUSINESS AMENDMENT REGULATION Filed: June 29, 2000 Made by the Minister of Government Services (M.O. C:011/00) on June 27, 2000 pursuant to sections 105(1)(d), 139(h) and 140(3)(d) of the Fair Trading Act. 1 The Automotive Business Regulation (AR 192/99) is amended by this Regulation. 2 Section 2(3) is repealed and the following substituted (3) A general automotive business licence that was issued on or after May 1, 1999 expires on June 30, 2000. (4) A general automotive business that was issued before May 1, 1999 expires on the date on which it would have expired under the Automotive Business Licencing Regulation (AR 188/78) had it not been repealed. 3 The following is added after section 2 No assessment 2.1 The Council shall not levy an assessment under the Act on the holder of a general automotive business licence referred to in section 2(4) until that licence has expired as set out in section 2(4). 4 Section 5 is repealed and the following is substituted: Term of licence 5(1) Where before June 30, 2000, a person holds a general automotive business licence that was issued on or after May 1, 1999 and applies for a licence referred to in section 3, the new licence has a term of one year and may be renewed for additional one-year terms. (2) Where a person does not hold a general automotive business licence before June 30, 2000 and applies for a licence referred to in section 3, the new licence has a term of one year and may be renewed for additional one-year terms. (3) Where a person holds a general automotive business licence referred to in section 2(4) and applies for a licence referred to in section 3 on the expiry of the general automotive business licence, the new licence has a term of one year and may be renewed for additional one-year terms. (4) In a case where, in the opinion of the Director, it is in the public interest to issue a licence referred to in section 3 for a term of less than one year, the Director may do so. 5 Section 16(4) is repealed and the following is substituted: (4) A salesperson of a general automotive business licensee must be registered for automotive sales, automotive leasing and automotive consignment before acting on behalf of the licensee. (5) A salesperson who acts on behalf of more than one licensee within the same class of automotive business licence need not obtain a separate registration in respect of each such licensee. (6) A salesperson who acts on behalf of more than one licensee shall forthwith identify to the Director each licensee on whose behalf the salesperson acts. (7) Where a salesperson ceases to act on behalf of a licensee the salesperson shall forthwith return to the Director the certificate issued in respect of the salesperson's acting for that licensee. (8) The registration of a salesperson is automatically cancelled where the salesperson is no longer authorized to act on behalf of any licensee. 6 Section 17.1 is amended by striking out "not later than July 1, 2000" and substituting "not later than October 1, 2000". 7 Section 20 is repealed and the following is substituted: Term of registration 20 The term of registration of a salesperson is one year and the registration may be renewed for additional one-year periods. 8 Section 20.1 is repealed and the following is substituted: Acting on behalf of licence 20.1 No salesperson may act on behalf of a licensee unless (a) the salesperson is registered for the class of licence held by the licensee, and (b) the licensee authorizes the salesperson to act on its behalf. 9 Section 34(2) is amended by adding "20.1," after "16, ". 10 Section 35(2) is repealed.