Copyright and Disclaimer Print


AR 269/2000 CONCRETE FINISHER TRADE REGULATION

(Consolidated up to 76/2018)

ALBERTA REGULATION 269/2000

Apprenticeship and Industry Training Act

CONCRETE FINISHER TRADE REGULATION

Table of Contents

                1      Definitions

General Matters Respecting the Trade

                2      Constitution of the trade

                3      Tasks, activities and functions

Apprenticeship

                4      Term of the apprenticeship program


                5      Employment of apprentices

                6      Wages

Transitional Provisions, Repeals
and Coming into Force

                7      Apprenticeship continues

                8      Repeal

              10      Coming into force

Definitions

1   In this Regulation,

                               (a)    “apprentice” means a person who is an apprentice in the trade;

                              (b)    “certified journeyperson” means a certified journeyperson as defined in the Apprenticeship Program Regulation;

                               (c)    “concrete” means cement products and, without limiting the generality of the foregoing, includes:

                                        (i)    cements;

                                      (ii)    concrete;

                                     (iii)    aggregate;

                                     (iv)    grouts;

                                       (v)    patching materials;

                                     (vi)    toppings;

                                    (vii)    admixtures;

                                   (viii)    agents;

                                     (ix)    epoxies;

                                       (x)    protective coatings;

                              (d)    “technical training” means technical training as defined in the Apprenticeship Program Regulation;

                               (e)    “trade” means the occupation of concrete finisher that is designated as an optional certification trade pursuant to the Apprenticeship and Industry Training Act;

                               (f)    “uncertified journeyperson” means an uncertified journeyperson as defined in the Apprenticeship Program Regulation.

AR 269/2000 s1;270/2006

General Matters Respecting the Trade

Constitution of the trade

2   The following undertakings constitute the trade:

                               (a)    the placing of concrete;

                              (b)    the finishing of concrete;

                               (c)    the restoring of concrete;

                              (d)    the repairing of concrete;

                               (e)    the repairing and resurfacing of existing concrete;

                               (f)    the application of curing treatments to concrete;

                               (g)    the application of surface treatments to concrete.

Tasks, activities and functions

3   When practising or otherwise carrying out work in the trade, the following tasks, activities and functions come within the trade:

                               (a)    handling concrete;

                              (b)    consolidating and compacting concrete;

                               (c)    edging, jointing and grooving concrete;

                              (d)    producing various finishes on concrete surfaces;

                               (e)    applying treatments to concrete;

                               (f)    cutting and coring hardened concrete;

                               (g)    scarifying concrete;

                              (h)    applying dry, wet and epoxy grouts;

                               (i)    using detailed drawings, blueprints and other specifications;

                               (j)    using hand tools, power tools, levels and explosive actuated tools;

                              (k)    using mixers, wall sawing, floor sawing, grooving, coring and grinding equipment;

                               (l)    using power consolidating, power screening and power trowelling equipment;

                             (m)    using, setting up and assembling rigging and hoisting equipment, ladders and scaffolds;

                              (n)    using any new innovative trade related technological changes that relate to materials or methods of construction.

AR 269/2000 s3;76/2018

Apprenticeship

Term of the apprenticeship program

4(1)  Subject to credit for previous training or experience being granted pursuant to an order of the Board, the term of an apprenticeship program for the trade is 2 periods of not less than 12 months each.

(2)  In the first period of the apprenticeship program an apprentice must acquire not less than 1680 hours of on the job training and successfully complete the technical training that is required or approved by the Board.

(3)  In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1680 hours of on the job training and successfully complete the technical training that is required or approved by the Board.

(4)  Repealed AR 76/2018 s3.

AR 269/2000 s4;76/2018

Employment of apprentices

5(1)  Where a person employs an apprentice, that employment must be carried out in accordance with this section.

(2)  A person who is a certified journeyperson or an uncertified journeyperson in the trade or employs a certified journeyperson or an uncertified journeyperson in the trade may employ 2 apprentices and 2 additional apprentices for each additional certified journeyperson or uncertified journeyperson in the trade that is employed by that person.

(3)  Repealed AR 76/2018 s4.

AR 269/2000 s5;102/2006;270/2006;1/2011;76/2018

Wages

6(1)  Subject to the Apprenticeship Program Regulation, a person shall not pay wages to an apprentice that are less than those provided for under subsection (2).

(2)  Subject to the Employment Standards Code, a person employing an apprentice must pay wages to the apprentice that are at least equal to the following percentages of the wages paid to employees who are certified journeypersons or uncertified journeypersons in the trade:

                               (a)    65% in the first period of the apprenticeship program;

                              (b)    75% in the 2nd period of the apprenticeship program;

                               (c)    repealed AR 76/2018 s5.

AR 269/2000 s6;270/2006;76/2018

Transitional Provisions, Repeals
and Coming into Force

Apprenticeship continues

7   A person who immediately prior to January 1, 2001 was an apprentice in an apprenticeship program under the Concrete Finisher Trade Regulation (AR 285/93) continues as an apprentice in that apprenticeship program under this Regulation.

Repeal

8   The Concrete Finisher Trade Regulation (AR 285/93) is repealed.

9   Repealed AR 213/2017 s3.

Coming into force

10   This Regulation comes into force on January 1, 2001.